[PATCH 3/3] arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configs

[Stefan Roese]

On 26.07.21 08:01, Tony Dinh wrote:
> - Enable DM SATA, removed IDE driver, and add SATA MV driver.
> - Use ethernet PHY names from device tree in default boot command
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
> 
>   include/configs/dreamplug.h | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)
> 
> diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
> index 9106203ebc..65962ee733 100644
> --- a/include/configs/dreamplug.h
> +++ b/include/configs/dreamplug.h
> @@ -31,8 +31,8 @@
>   /*
>    * Default environment variables
>    */
> -#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
> -	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
> +#define CONFIG_BOOTCOMMAND		"setenv ethact ethernet-controller at 72000; " \
> +	"${x_bootcmd_ethernet}; setenv ethact ethernet-controller at 76000; " \
>   	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
>   	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
>   	"bootm 0x6400000;"
> @@ -52,4 +52,12 @@
>   #define CONFIG_PHY_BASE_ADR	0
>   #endif /* CONFIG_CMD_NET */
>   
> +/*
> + * SATA Driver configuration
> + */
> +#ifdef CONFIG_SATA
> +#define CONFIG_SYS_SATA_MAX_DEVICE	1
> +#define CONFIG_LBA48
> +#endif /* CONFIG_SATA */
> +
>   #endif /* _CONFIG_DREAMPLUG_H */
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de