[PATCH 3/3] arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configs

[Tony Dinh]

- Enable DM SATA, removed IDE driver, and add SATA MV driver.
- Use ethernet PHY names from device tree in default boot command

Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---

 include/configs/dreamplug.h | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 9106203ebc..65962ee733 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -31,8 +31,8 @@
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
-	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
+#define CONFIG_BOOTCOMMAND		"setenv ethact ethernet-controller at 72000; " \
+	"${x_bootcmd_ethernet}; setenv ethact ethernet-controller at 76000; " \
 	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
 	"bootm 0x6400000;"
@@ -52,4 +52,12 @@
 #define CONFIG_PHY_BASE_ADR	0
 #endif /* CONFIG_CMD_NET */
 
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_LBA48
+#endif /* CONFIG_SATA */
+
 #endif /* _CONFIG_DREAMPLUG_H */
-- 
2.20.1