[PATCH] test/py: tpm2: Skip tpm pytest based on env variable

[T Karthik Reddy]

Hi,
	Any update on this patch?

Thanks
T Karthik

> -----Original Message-----
> From: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> Sent: Tuesday, June 22, 2021 11:19 AM
> To: u-boot at lists.denx.de
> Cc: git-dev <git-dev at xilinx.com>; T Karthik Reddy <tkarthik at xilinx.com>
> Subject: [PATCH] test/py: tpm2: Skip tpm pytest based on env variable
> 
> Tpm test cases relies on tpm device setup. Provide an environment variable
> "env__tpm_device_test_skip = True" to skip the test case if tpm device is
> not present.
> Only needed will have to add variable to the py-test framework.
> Test runs successfully even this variable is absent.
> 
> Signed-off-by: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> ---
> 
>  test/py/tests/test_tpm2.py | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/test/py/tests/test_tpm2.py b/test/py/tests/test_tpm2.py index
> 70f906da51..bb147d4e88 100644
> --- a/test/py/tests/test_tpm2.py
> +++ b/test/py/tests/test_tpm2.py
> @@ -18,6 +18,15 @@ any password.
>  * Commands like pcr_setauthpolicy and pcr_resetauthpolicy are not
> implemented  here because they would fail the tests in most cases (TPMs do
> not implement them  and return an error).
> +
> +
> +Note:
> +This test doesn't rely on boardenv_* configuration value but can change
> +test behavior.
> +
> +* Setup env__tpm_device_test_skip to True if tests with TPM devices
> +should be skipped.
> +
>  """
> 
>  updates = 0
> @@ -29,6 +38,9 @@ def force_init(u_boot_console, force=False):
>      twice will spawn an error used to detect that the TPM was not reset and
> no
>      initialization code should be run.
>      """
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
>      output = u_boot_console.run_command('tpm2 init')
>      if force or not 'Error' in output:
>          u_boot_console.run_command('echo --- start of init ---') @@ -44,6
> +56,10 @@ def force_init(u_boot_console, force=False):
>  def test_tpm2_init(u_boot_console):
>      """Init the software stack to use TPMv2 commands."""
> 
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
> +
>      u_boot_console.run_command('tpm2 init')
>      output = u_boot_console.run_command('echo $?')
>      assert output.endswith('0')
> @@ -55,6 +71,9 @@ def test_tpm2_startup(u_boot_console):
>      Initiate the TPM internal state machine.
>      """
> 
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
>      u_boot_console.run_command('tpm2 startup TPM2_SU_CLEAR')
>      output = u_boot_console.run_command('echo $?')
>      assert output.endswith('0')
> @@ -66,6 +85,9 @@ def test_tpm2_self_test_full(u_boot_console):
>      Ask the TPM to perform all self tests to also enable full capabilities.
>      """
> 
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
>      u_boot_console.run_command('tpm2 self_test full')
>      output = u_boot_console.run_command('echo $?')
>      assert output.endswith('0')
> @@ -78,6 +100,9 @@ def test_tpm2_continue_self_test(u_boot_console):
>      to enter a fully operational state.
>      """
> 
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
>      u_boot_console.run_command('tpm2 self_test continue')
>      output = u_boot_console.run_command('echo $?')
>      assert output.endswith('0')
> @@ -95,6 +120,9 @@ def test_tpm2_clear(u_boot_console):
>      PLATFORM hierarchies are also available.
>      """
> 
> +    skip_test =
> u_boot_console.config.env.get('env__tpm_device_test_skip', False)
> +    if skip_test:
> +        pytest.skip('skip TPM device test')
>      u_boot_console.run_command('tpm2 clear TPM2_RH_LOCKOUT')
>      output = u_boot_console.run_command('echo $?')
>      assert output.endswith('0')
> --
> 2.17.1