U-Boot Digest, Vol 158, Issue 63

Tom Rini trini at konsulko.com
Wed Jul 28 18:43:05 CEST 2021


On Wed, Jul 28, 2021 at 12:22:57PM -0400, Oleksandr G Zhadan wrote:
> Hello,
> 
> Please see inline.
> 
> On 7/26/21 9:40 AM, u-boot-request at lists.denx.de wrote:
> > Message: 13
> > Date: Mon, 26 Jul 2021 07:34:06 -0600
> > From: Simon Glass<sjg at chromium.org>
> > To: U-Boot Mailing List<u-boot at lists.denx.de>
> > Cc: Tom Rini<trini at konsulko.com>, Simon Glass<sjg at chromium.org>,
> > 	Albert Aribaud<albert.u.boot at aribaud.net>, Andy Fleming
> > 	<afleming at gmail.com>, Joe Hershberger<joe.hershberger at ni.com>, Marek
> > 	Vasut<marex at denx.de>, Mario Six<mario.six at gdsys.cc>, Oleksandr
> > 	Zhadan and Michael Durrant<arcsupport at arcturusnetworks.com>, Pavel
> > 	Herrmann<morpheus.ibis at gmail.com>, Priyanka Jain
> > 	<priyanka.jain at nxp.com>, Rob Herring<rob.herring at calxeda.com>, Stefan
> > 	Roese<sr at denx.de>, Stefano Babic<sbabic at denx.de>, Wolfgang Denk
> > 	<wd at denx.de>
> > Subject: [PATCH 00/33] pci: Drop all pre-driver model code
> > Message-ID:<20210726133440.634682-1-sjg at chromium.org>
> > 
> > The hard work to actually enable DM_PCI everywhere was done recently. This
> > series attempts to drop most of the code that it no-longer needed now that
> > PCI has been converted to driver model.
> 
> > It also drops the UCP1020 board since it has various unique build issues.
> 
> What issues are we talking about?Please name it.
> 
> Today's u-boot clone builds and runs fine in our module without any warnings
> except:
> 
> > git clone https://source.denx.de/u-boot/u-boot.git u-boot-20210728
> 
> > cd u-boot-20210728
> 
> > make UCP1020_defconfig
> 
> > CROSS_COMPILE=powerpc-linux- make 2>222
> 
>  > cat 222
> ===================== WARNING ======================
> This board does not use CONFIG_DM. CONFIG_DM will be
> compulsory starting with the v2020.01 release.
> Failure to update may result in board removal.
> See doc/driver-model/migration.rst for more info.
> ====================================================
> ===================== WARNING ======================
> This board does not use CONFIG_DM_ETH (Driver Model
> for Ethernet drivers). Please update the board to use
> CONFIG_DM_ETH before the v2020.07 release. Failure to
> update by the deadline may result in board removal.
> See doc/driver-model/migration.rst for more info.
> ===================================================
> 
> > It doesn't even support driver model so it seems reasonable to just remove
> > it.
> 1. Sure it's my fault that I didn't notice the warnings that CONFIG_DM is
> the only choice to build and run u-boot.
> 
> 2. Why is CONFIG_DM still present in `make menuconfig` options?
> 
> 3. We only use u-boot as the first stage bootloader to start the kernel. We
> need minimal device controllers support. We don't need anything like PCI,
> USB, etc.
> 
> 4. At least you need to add doc/driver-model/migration.rst to the source
> tree from https://source.denx.de/u-boot/u-boot.git if you point to it in
> your warnings.
> 
> And
> 
> 5. I have seen NO reason to remove ANY support board without REAL reasons to
> do so.

So, unfortunately this was the only board that was not triggering the
PCI migration warning as well because of how it was using the legacy PCI
subsystem.  For today, if you want to continue to be in mainline, just
removing the PCI and other options that you don't use, and submitting
that patch is sufficient.

> SUMMARY:
> 
> 1. UCP1020_defconfig does not have any compiler warnings on build (at least
> 2021.07.28 clone).
> 
> 2. If now the only choice is CONFIG_DM, then it should be removed as an
> option from "make menuconfig", and we will definitely fix the related
> warnings/errors.
> 
> 3. IMPO board support can be removed if it breaks when built and/or breaks
> any other builds.

Note that CONFIG_DM is still an option because it won't be until after
the v2022.01 window (when that migration warning you noted above) will
have been present for about 3 years.  It's still an option as we're down
to 15 boards (UCP included) that need migration still.  Having just
counted that, I'm quite likely to fire off a separate email now and see
if there's interest in these boards being updated or not, now that we're
down to so few boards.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210728/2447b25d/attachment.sig>


More information about the U-Boot mailing list