[PATCH 1/7] mmc: sdhci: Return error in case of failure
Jaehoon Chung
jh80.chung at samsung.com
Sun Jul 25 23:48:13 CEST 2021
Hi Ashok,
On 7/24/21 5:10 PM, Ashok Reddy Soma wrote:
> From: T Karthik Reddy <t.karthik.reddy at xilinx.com>
>
> set_delay() function is from sdhci host ops, which does not return
> any error due to void return type. Get return values from input and
> output set clock phase functions inside arasan_sdhci_set_tapdelay()
> and return the errors.
>
> Change return type to int for arasan_sdhci_set_tapdelay() and also for
> set_delay() in sdhci_ops structure.
Could you separate the patch to sdhci and zync_sdhci part?
>
> Signed-off-by: T Karthik Reddy <t.karthik.reddy at xilinx.com>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
> ---
>
> drivers/mmc/sdhci.c | 8 ++++++--
> drivers/mmc/zynq_sdhci.c | 21 ++++++++++++++++-----
> include/sdhci.h | 2 +-
> 3 files changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index d9ab6a0a83..f144602eec 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -366,6 +366,7 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
> {
> struct sdhci_host *host = mmc->priv;
> unsigned int div, clk = 0, timeout;
> + int ret;
>
> /* Wait max 20 ms */
> timeout = 200;
> @@ -386,8 +387,11 @@ int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
> if (clock == 0)
> return 0;
>
> - if (host->ops && host->ops->set_delay)
> - host->ops->set_delay(host);
> + if (host->ops && host->ops->set_delay) {
> + ret = host->ops->set_delay(host);
> + if (ret)
> + return ret;
how about adding debug(). It's helpful to debug when it's failed.
Best Regards,
Jaehoon Chung
> + }
>
> if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
> /*
> diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
> index ba87ee8dd5..9fb3603c7e 100644
> --- a/drivers/mmc/zynq_sdhci.c
> +++ b/drivers/mmc/zynq_sdhci.c
> @@ -422,7 +422,7 @@ static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
> return 0;
> }
>
> -static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
> +static int arasan_sdhci_set_tapdelay(struct sdhci_host *host)
> {
> struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
> struct arasan_sdhci_clk_data *clk_data = &priv->clk_data;
> @@ -431,18 +431,29 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
> u8 timing = mode2timing[mmc->selected_mode];
> u32 iclk_phase = clk_data->clk_phase_in[timing];
> u32 oclk_phase = clk_data->clk_phase_out[timing];
> + int ret;
>
> dev_dbg(dev, "%s, host:%s, mode:%d\n", __func__, host->name, timing);
>
> if (IS_ENABLED(CONFIG_ARCH_ZYNQMP) &&
> device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
> - sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
> - sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
> + ret = sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
> + if (ret)
> + return ret;
> + ret = sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
> + if (ret)
> + return ret;
> } else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
> device_is_compatible(dev, "xlnx,versal-8.9a")) {
> - sdhci_versal_sampleclk_set_phase(host, iclk_phase);
> - sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
> + ret = sdhci_versal_sampleclk_set_phase(host, iclk_phase);
> + if (ret)
> + return ret;
> + ret = sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
> + if (ret)
> + return ret;
> }
> +
> + return 0;
> }
>
> static void arasan_dt_read_clk_phase(struct udevice *dev, unsigned char timing,
> diff --git a/include/sdhci.h b/include/sdhci.h
> index 0ae9471ad7..44a0d84e5a 100644
> --- a/include/sdhci.h
> +++ b/include/sdhci.h
> @@ -268,7 +268,7 @@ struct sdhci_ops {
> int (*set_ios_post)(struct sdhci_host *host);
> void (*set_clock)(struct sdhci_host *host, u32 div);
> int (*platform_execute_tuning)(struct mmc *host, u8 opcode);
> - void (*set_delay)(struct sdhci_host *host);
> + int (*set_delay)(struct sdhci_host *host);
> int (*deferred_probe)(struct sdhci_host *host);
> };
>
>
More information about the U-Boot
mailing list