[PATCH 2/6] configs: synquacer: Make U-Boot binary position independent

Masami Hiramatsu masami.hiramatsu at linaro.org
Fri Jul 9 12:50:18 CEST 2021


Make the U-Boot bianry for SynQuacer position independent so
that the previous bootloader (SCP firmware or BL2) can load
the U-Boot anywhere.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu at linaro.org>
---
 configs/synquacer_developerbox_defconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/configs/synquacer_developerbox_defconfig b/configs/synquacer_developerbox_defconfig
index d42db9a1d6..fe30f0169f 100644
--- a/configs/synquacer_developerbox_defconfig
+++ b/configs/synquacer_developerbox_defconfig
@@ -1,11 +1,13 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SYNQUACER=y
-CONFIG_SYS_TEXT_BASE=0x08200000
+CONFIG_SYS_TEXT_BASE=0x00000000
 CONFIG_ENV_SIZE=0x30000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DEBUG_UART_BASE=0x2a400000
 CONFIG_DEBUG_UART_CLOCK=62500000
 CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_INIT_SP_RELATIVE=y
 CONFIG_DM_GPIO=y
 CONFIG_TARGET_DEVELOPERBOX=y
 CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox"



More information about the U-Boot mailing list