[PATCH 3/3] arm: dts: sync the Rockhip 3368 SoCs from Linux

Peter Robinson pbrobinson at gmail.com
Thu Jul 22 17:20:44 CEST 2021


Sync the rk3368 DTs and associated bits from 5.14-rc1.

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm/dts/rk3368-geekbox.dts     |  70 +++--------
 arch/arm/dts/rk3368-lion-haikou.dts |   4 +
 arch/arm/dts/rk3368-lion.dtsi       |  21 +---
 arch/arm/dts/rk3368-px5-evb.dts     | 178 +++++++++++-----------------
 arch/arm/dts/rk3368.dtsi            |  65 +++++-----
 5 files changed, 118 insertions(+), 220 deletions(-)

diff --git a/arch/arm/dts/rk3368-geekbox.dts b/arch/arm/dts/rk3368-geekbox.dts
index 46cdddfcea..62aa97a0b8 100644
--- a/arch/arm/dts/rk3368-geekbox.dts
+++ b/arch/arm/dts/rk3368-geekbox.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -48,6 +11,10 @@
 	model = "GeekBox";
 	compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial2:115200n8";
 	};
@@ -66,7 +33,7 @@
 
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ir_int>;
 	};
@@ -77,7 +44,7 @@
 		pinctrl-0 = <&pwr_key>;
 
 		power {
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <KEY_POWER>;
 			wakeup-source;
@@ -87,14 +54,14 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		blue_led: led-0 {
+			gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "geekbox:blue:led";
 			default-state = "on";
 		};
 
-		red {
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		red_led: led-1 {
+			gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
 			label = "geekbox:red:led";
 			default-state = "off";
 		};
@@ -115,10 +82,7 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
-	disable-wp;
-	keep-power-in-suspend;
 	non-removable;
-	num-slots = <1>;
 	vmmc-supply = <&vcc_io>;
 	vqmmc-supply = <&vcc18_flash>;
 	pinctrl-names = "default";
@@ -147,7 +111,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -258,8 +222,6 @@
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 
@@ -275,23 +237,23 @@
 &pinctrl {
 	ir {
 		ir_int: ir-int {
-			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	keys {
 		pwr_key: pwr-key {
-			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		pmic_sleep: pmic-sleep {
-			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
 		};
 
 		pmic_int: pmic-int {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };
diff --git a/arch/arm/dts/rk3368-lion-haikou.dts b/arch/arm/dts/rk3368-lion-haikou.dts
index 7fcb1eacea..cae01d35b9 100644
--- a/arch/arm/dts/rk3368-lion-haikou.dts
+++ b/arch/arm/dts/rk3368-lion-haikou.dts
@@ -10,6 +10,10 @@
 	model = "Theobroma Systems RK3368-uQ7 Baseboard";
 	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
 
+	aliases {
+		mmc1 = &sdmmc;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
diff --git a/arch/arm/dts/rk3368-lion.dtsi b/arch/arm/dts/rk3368-lion.dtsi
index 532e6a6828..bcd7977fb0 100644
--- a/arch/arm/dts/rk3368-lion.dtsi
+++ b/arch/arm/dts/rk3368-lion.dtsi
@@ -7,6 +7,10 @@
 #include "rk3368.dtsi"
 
 / {
+	aliases {
+		mmc0 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -150,7 +154,6 @@
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;
 	clock_in_out = "input";
-	phy-handle = <&phy0>;
 	phy-supply = <&vcc33_io>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
@@ -161,22 +164,6 @@
 	tx_delay = <0x10>;
 	rx_delay = <0x10>;
 	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Microsemi VSC8531-02 */
-		phy0: phy at 0 {
-		compatible = "ethernet-phy-id0007.0570";
-			reg = <0>;
-			vsc8531,clk-out-frequency = <125000000>;
-			vsc8531,edge-slowdown = <7>;
-			vsc8531,led-0-mode = <1>;
-			vsc8531,led-1-mode = <2>;
-		};
-	};
 };
 
 &i2c0 {
diff --git a/arch/arm/dts/rk3368-px5-evb.dts b/arch/arm/dts/rk3368-px5-evb.dts
index e9c5ebad47..5ccaa5f7a3 100644
--- a/arch/arm/dts/rk3368-px5-evb.dts
+++ b/arch/arm/dts/rk3368-px5-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright (c) 2017 Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
  */
 
 /dts-v1/;
@@ -45,30 +8,21 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "PX5 EVB";
+	model = "Rockchip PX5 EVB";
 	compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
+	aliases {
+		mmc0 = &sdmmc;
+		mmc1 = &emmc;
+	};
+
 	chosen {
 		stdout-path = "serial4:115200n8";
 	};
 
 	memory at 0 {
-		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-
-	ext_gmac: gmac-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-		#clock-cells = <0>;
-	};
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ir_int>;
+		device_type = "memory";
 	};
 
 	keys: gpio-keys {
@@ -77,29 +31,13 @@
 		pinctrl-0 = <&pwr_key>;
 
 		power {
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 	};
 
-	leds: gpio-leds {
-		compatible = "gpio-leds";
-
-		blue {
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			label = "geekbox:blue:led";
-			default-state = "on";
-		};
-
-		red {
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-			label = "geekbox:red:led";
-			default-state = "off";
-		};
-	};
-
 	vcc_sys: vcc-sys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -115,27 +53,14 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	clock-frequency = <150000000>;
-	disable-wp;
-	keep-power-in-suspend;
+	mmc-hs200-1_8v;
+	no-sdio;
+	no-sd;
 	non-removable;
-	num-slots = <1>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc18_flash>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
-};
-
-&gmac {
-	status = "okay";
-	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	clock_in_out = "input";
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_flash>;
 };
 
 &i2c0 {
@@ -144,10 +69,10 @@
 	rk808: pmic at 1b {
 		compatible = "rockchip,rk808";
 		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_int>, <&pmic_sleep>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
@@ -202,12 +127,12 @@
 				regulator-name = "vcc18_flash";
 			};
 
-			vcc33_lcd: LDO_REG2 {
+			vcca_33: LDO_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc33_lcd";
+				regulator-name = "vcca_33";
 			};
 
 			vdd_10: LDO_REG3 {
@@ -218,11 +143,10 @@
 				regulator-name = "vdd_10";
 			};
 
-			vcca_18: LDO_REG4 {
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcca_18";
+			avdd_33: LDO_REG4 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "avdd_33";
 			};
 
 			vccio_sd: LDO_REG5 {
@@ -258,46 +182,76 @@
 			};
 
 			vcc_sd: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
 				regulator-name = "vcc_sd";
 			};
 
-			vcc_lan: SWITCH_REG2 {
+			vcc33_lcd: SWITCH_REG2 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_lan";
+				regulator-name = "vcc33_lcd";
 			};
 		};
 	};
 };
 
-&pinctrl {
-	ir {
-		ir_int: ir-int {
-			rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
+&i2c1 {
+	status = "okay";
+
+	accelerometer at 18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
 	};
+};
 
+&i2c2 {
+	status = "okay";
+
+	gsl1680: touchscreen at 40 {
+		compatible = "silead,gsl1680";
+		reg = <0x40>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>;
+		power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <1280>;
+		silead,max-fingers = <5>;
+	};
+};
+
+&pinctrl {
 	keys {
 		pwr_key: pwr-key {
-			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
 		pmic_sleep: pmic-sleep {
-			rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
 		};
 
 		pmic_int: pmic-int {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };
 
-&saradc {
+&sdmmc {
 	status = "okay";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	no-sdio;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>;
+	rockchip,default-sample-phase = <90>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 };
 
 &tsadc {
diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi
index cd2c322071..4c64fbefb4 100644
--- a/arch/arm/dts/rk3368.dtsi
+++ b/arch/arm/dts/rk3368.dtsi
@@ -136,37 +136,6 @@
 		};
 	};
 
-	amba: bus {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		dmac_peri: dma-controller at ff250000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xff250000 0x0 0x4000>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			arm,pl330-broken-no-flushp;
-			arm,pl330-periph-burst;
-			clocks = <&cru ACLK_DMAC_PERI>;
-			clock-names = "apb_pclk";
-		};
-
-		dmac_bus: dma-controller at ff600000 {
-			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x0 0xff600000 0x0 0x4000>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			arm,pl330-broken-no-flushp;
-			arm,pl330-periph-burst;
-			clocks = <&cru ACLK_DMAC_BUS>;
-			clock-names = "apb_pclk";
-		};
-	};
-
 	arm-pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
@@ -399,8 +368,20 @@
 		status = "disabled";
 	};
 
+	dmac_peri: dma-controller at ff250000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff250000 0x0 0x4000>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_PERI>;
+		clock-names = "apb_pclk";
+	};
+
 	thermal-zones {
-		cpu {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <100>; /* milliseconds */
 			polling-delay = <5000>; /* milliseconds */
 
@@ -444,7 +425,7 @@
 			};
 		};
 
-		gpu {
+		gpu_thermal: gpu-thermal {
 			polling-delay-passive = <100>; /* milliseconds */
 			polling-delay = <5000>; /* milliseconds */
 
@@ -532,6 +513,18 @@
 		status = "disabled";
 	};
 
+	dmac_bus: dma-controller at ff600000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0xff600000 0x0 0x4000>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		arm,pl330-broken-no-flushp;
+		arm,pl330-periph-burst;
+		clocks = <&cru ACLK_DMAC_BUS>;
+		clock-names = "apb_pclk";
+	};
+
 	i2c0: i2c at ff650000 {
 		compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c";
 		reg = <0x0 0xff650000 0x0 0x1000>;
@@ -565,7 +558,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		clocks = <&cru PCLK_PWM1>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -576,7 +568,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		clocks = <&cru PCLK_PWM1>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -585,7 +576,6 @@
 		reg = <0x0 0xff680020 0x0 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM1>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -596,7 +586,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		clocks = <&cru PCLK_PWM1>;
-		clock-names = "pwm";
 		status = "disabled";
 	};
 
@@ -675,6 +664,8 @@
 		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
 	};
 
 	spdif: spdif at ff880000 {
-- 
2.31.1



More information about the U-Boot mailing list