[PATCH v2 3/6] dts: synquacer: Add partition information to the spi-nor

[Masami Hiramatsu]

Add partition information to the spi-nor flash.
This is required for accessing NOR flash via mtdparts.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu at linaro.org>
---
 Changes in v2:
  - Add new lines to separate the partitions.
---
 .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   49 ++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
index 2f13a42235..7a56116d6f 100644
--- a/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
+++ b/arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
@@ -31,6 +31,55 @@
 			spi-max-frequency = <31250000>;
 			spi-rx-bus-width = <0x1>;
 			spi-tx-bus-width = <0x1>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition at 0 {
+					label = "BootStrap-BL1";
+					reg = <0x0 0x70000>;
+					read-only;
+				};
+
+				partition at 70000 {
+					label = "Flash-Writer";
+					reg = <0x70000 0x90000>;
+					read-only;
+				};
+
+				partition at 100000 {
+					label = "SCP-BL2";
+					reg = <0x100000 0x80000>;
+					read-only;
+				};
+
+				partition at 180000 {
+					label = "FIP-TFA";
+					reg = <0x180000 0x78000>;
+				};
+
+				partition at 1f8000 {
+					label = "Stage2Tables";
+					reg = <0x1f8000 0x8000>;
+				};
+
+				partition at 200000 {
+					label = "U-Boot";
+					reg = <0x200000 0x100000>;
+				};
+
+				partition at 300000 {
+					label = "UBoot-Env";
+					reg = <0x300000 0x100000>;
+				};
+
+				partition at 500000 {
+					label = "Ex-OPTEE";
+					reg = <0x500000 0x200000>;
+				};
+			};
 		};
 	};