[PATCH 1/4] arm64: rk3399: r4s: correct the LEDS label name

[Xiaobo Tian]

Correct the LEDS label name and remove the board type prefix,
which is actually unnecessary here, removes the redefined system status LED pin.

Signed-off-by: Xiaobo Tian <peterwillcn at gmail.com>
---
 arch/arm/dts/rk3399-nanopi-r4s.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts b/arch/arm/dts/rk3399-nanopi-r4s.dts
index 6f2cf17bf1..7470c26820 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -76,18 +76,17 @@
 &leds {
 	lan_led: led-1 {
 		gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
-		label = "nanopi-r4s:green:lan";
+		label = "green:lan";
 	};
 
 	wan_led: led-2 {
 		gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-		label = "nanopi-r4s:green:wan";
+		label = "green:wan";
 	};
 };
 
 &leds_gpio {
 	rockchip,pins =
-		<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
 		<1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
 		<1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 };
-- 
2.32.0