[PATCH] board: sl28: drop unneeded and outdated flash partitions

[Michael Walle]

This board doesn't use the MTD subsystem in u-boot, thus there is no
need to specify the partitions. They are outdated anyway. Just drop
them.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm/dts/fsl-ls1028a-kontron-sl28.dts | 55 -----------------------
 1 file changed, 55 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
index ea77a83d2f..7f237c39ec 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
@@ -72,61 +72,6 @@
 		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
 		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
 		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-
-		partition at 0 {
-			reg = <0x000000 0x010000>;
-			label = "rcw";
-			read-only;
-		};
-
-		partition at 10000 {
-			reg = <0x010000 0x0f0000>;
-			label = "failsafe bootloader";
-			read-only;
-		};
-
-		partition at 100000 {
-			reg = <0x100000 0x040000>;
-			label = "failsafe DP firmware";
-			read-only;
-		};
-
-		partition at 140000 {
-			reg = <0x140000 0x0a0000>;
-			label = "failsafe trusted firmware";
-			read-only;
-		};
-
-		partition at 1e0000 {
-			reg = <0x1e0000 0x020000>;
-			label = "reserved";
-			read-only;
-		};
-
-		partition at 200000 {
-			reg = <0x200000 0x010000>;
-			label = "configuration store";
-		};
-
-		partition at 210000 {
-			reg = <0x210000 0x0f0000>;
-			label = "bootloader";
-		};
-
-		partition at 300000 {
-			reg = <0x300000 0x040000>;
-			label = "DP firmware";
-		};
-
-		partition at 340000 {
-			reg = <0x340000 0x0a0000>;
-			label = "trusted firmware";
-		};
-
-		partition at 3e0000 {
-			reg = <0x3e0000 0x020000>;
-			label = "bootloader environment";
-		};
 	};
 };
 
-- 
2.20.1