[PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman

[Teresa Remmet]

Hello Jagan,

Am Montag, den 05.07.2021, 11:01 +0530 schrieb Jagan Teki:
> On Fri, Jul 2, 2021 at 4:49 PM Teresa Remmet <t.remmet at phytec.de>
> wrote:
> > Use now binman for image creation.
> > 
> > Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
> > ---
> >  .../imx8mp-phyboard-pollux-rdk-u-boot.dtsi    | 105
> > ++++++++++++++++++
> >  arch/arm/mach-imx/imx8m/Kconfig               |   1 +
> >  .../phytec/phycore_imx8mp/imximage-8mp-sd.cfg |  10 ++
> >  configs/phycore-imx8mp_defconfig              |   4 +-
> >  4 files changed, 118 insertions(+), 2 deletions(-)
> >  create mode 100644 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg
> > 
> > diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> > b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> > index dbc48dfb4841..2b8e77cb27c5 100644
> > --- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> > +++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
> > @@ -7,6 +7,10 @@
> >  #include "imx8mp-u-boot.dtsi"
> > 
> >  / {
> > +       binman: binman {
> > +               multiple-images;
> > +       };
> > +
> >         wdt-reboot {
> >                 compatible = "wdt-reboot";
> >                 wdt = <&wdog1>;
> > @@ -81,3 +85,104 @@
> >  &wdog1 {
> >         u-boot,dm-spl;
> >  };
> > +
> > +&binman {
> > +        u-boot-spl-ddr {
> > +               filename = "u-boot-spl-ddr.bin";
> > +               pad-byte = <0xff>;
> > +               align-size = <4>;
> > +               align = <4>;
> > +
> > +               u-boot-spl {
> > +                       align-end = <4>;
> > +               };
> > +
> > +               blob_1: blob-ext at 1 {
> > +                       filename =
> > "lpddr4_pmu_train_1d_imem_202006.bin";
> > +                       size = <0x8000>;
> > +               };
> > +
> > +               blob_2: blob-ext at 2 {
> > +                       filename =
> > "lpddr4_pmu_train_1d_dmem_202006.bin";
> > +                       size = <0x4000>;
> > +               };
> > +
> > +               blob_3: blob-ext at 3 {
> > +                       filename =
> > "lpddr4_pmu_train_2d_imem_202006.bin";
> > +                       size = <0x8000>;
> > +               };
> > +
> > +               blob_4: blob-ext at 4 {
> > +                       filename =
> > "lpddr4_pmu_train_2d_dmem_202006.bin";
> > +                       size = <0x4000>;
> > +               };
> > +       };
> > +
> > +       flash {
> > +               mkimage {
> > +                       args = "-n spl/u-boot-spl.cfgout -T
> > imx8mimage -e 0x920000";
> > +
> > +                       blob {
> > +                               filename = "u-boot-spl-ddr.bin";
> > +                       };
> > +               };
> > +       };
> > +
> > +       itb {
> > +               filename = "u-boot.itb";
> > +
> > +               fit {
> > +                       description = "Configuration to load ATF
> > before U-Boot";
> > +                       #address-cells = <1>;
> > +                       fit,external-offset =
> > <CONFIG_FIT_EXTERNAL_OFFSET>;
> > +
> > +                       images {
> > +                               uboot {
> > +                                       description = "U-Boot (64-
> > bit)";
> > +                                       type = "standalone";
> > +                                       arch = "arm64";
> > +                                       compression = "none";
> > +                                       load =
> > <CONFIG_SYS_TEXT_BASE>;
> > +
> > +                                       uboot_blob: blob-ext {
> > +                                               filename = "u-boot-
> > nodtb.bin";
> > +                                       };
> > +                               };
> > +
> > +                               atf {
> > +                                       description = "ARM Trusted
> > Firmware";
> > +                                       type = "firmware";
> > +                                       arch = "arm64";
> > +                                       compression = "none";
> > +                                       load = <0x970000>;
> > +                                       entry = <0x970000>;
> > +
> > +                                       atf_blob: blob-ext {
> > +                                               filename =
> > "bl31.bin";
> > +                                       };
> > +                               };
> > +
> > +                               fdt {
> > +                                       description = "NAME";
> > +                                       type = "flat_dt";
> > +                                       compression = "none";
> > +
> > +                                       uboot_fdt_blob: blob-ext {
> > +                                               filename = "u-
> > boot.dtb";
> > +                                       };
> > +                               };
> > +                       };
> > +
> > +                       configurations {
> > +                               default = "conf";
> > +
> > +                               conf {
> > +                                       description = "NAME";
> > +                                       firmware = "uboot";
> > +                                       loadables = "atf";
> > +                                       fdt = "fdt";
> > +                               };
> > +                       };
> > +               };
> > +       };
> > +};
> 
> I think this will increase the same copy of its in respective boards
> with changes in ddr names. Better to have common script to update the
> final its by taking ddr files via env, like it was done in Rockchip,
> Allwinner.

I could move the binman nodes also to "imx8mp-u-boot.dtsi". If it is
only the ddr firmware names that might differ, they could be
overwritten in the board specific u-boot.dtsi files using the blob_*
labels. 

What do you think?

Teresa


> 
> Jagan.