[PATCH 1/2] clk: stm32mp1: add support of SYSCFG clock

[Patrick DELAUNAY]

Hi,

On 6/29/21 12:04 PM, Patrick Delaunay wrote:
> Add the support of SYSCFG clock used by syscon driver
> to prepare the clock management of STM32MP_SYSCON_SYSCFG.
>
> This clock is already defined in kernel device tree,
> stm32mp151.dtsi but not yet supported in the syscon driver:
>
> syscfg: syscon at 50020000 {
> 	compatible = "st,stm32mp157-syscfg", "syscon";
> 	reg = <0x50020000 0x400>;
> 	clocks = <&rcc SYSCFG>;
> };
>
> It is safe to support this clock in U-Boot driver with
> RCC_MC_APB3ENSETR, Bit 11 SYSCFGEN: SYSCFG peripheral clocks
> enable.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>
>   drivers/clk/clk_stm32mp1.c | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c
> index 0c0ef366a1..48c9514ba0 100644
> --- a/drivers/clk/clk_stm32mp1.c
> +++ b/drivers/clk/clk_stm32mp1.c
> @@ -540,6 +540,7 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = {
>   	STM32MP1_CLK_SET_CLR(RCC_MP_APB2ENSETR, 13, USART6_K, _UART6_SEL),
>   
>   	STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 13, VREF, _PCLK3),
> +	STM32MP1_CLK_SET_CLR_F(RCC_MP_APB3ENSETR, 11, SYSCFG, _UNKNOWN_SEL),
>   
>   	STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 0, LTDC_PX, _PLL4_Q),
>   	STM32MP1_CLK_SET_CLR_F(RCC_MP_APB4ENSETR, 4, DSI_PX, _PLL4_Q),


Applied to u-boot-stm/master, thanks!

Regards
Patrick