[PATCH 0/8] imx8mm: Add serial download support

Fabio Estevam festevam at denx.de
Sat Jul 3 21:58:29 CEST 2021


This series brings USB gadget support for i.MX8MM
and allows the usage of the Serial Download Protocol,
which is a convenient way for loading U-Boot via the 
'uuu' tool and and flashing the eMMC via the U-Boot 
'ums' command.

Tested on imx8mm-evk and imx7s-warp.

Fabio Estevam (4):
  usb: ehci-mx6: Allow building SDP for imx8mm
  imx8mm_evk: Add an entry for USB boot
  imx8mm_evk: Add Serial Download Protocol support
  doc: imx8mm_evk: Add instructions for eMMC boot

Frieder Schrempf (2):
  imx8mm: Fix USB reg addresses for i.MX8MM
  clock_imx8mm: Add enable_usboh3_clk() for i.MX8MM

Tim Harvey (2):
  usb: ehci-mx6: move mode set/detect to probe
  usb: ehci-mx6: add IMX8MM and IMX8MN OTG support

 arch/arm/include/asm/arch-imx8m/clock.h    |  1 +
 arch/arm/include/asm/arch-imx8m/imx-regs.h | 11 ++++
 arch/arm/mach-imx/imx8m/clock_imx8mm.c     | 16 ++++++
 board/freescale/imx8mm_evk/spl.c           |  2 +
 configs/imx8mm_evk_defconfig               | 19 +++++++
 doc/board/freescale/imx8mm_evk.rst         | 42 +++++++++++++--
 drivers/usb/host/ehci-mx6.c                | 62 ++++++++++------------
 7 files changed, 114 insertions(+), 39 deletions(-)

-- 
2.25.1



More information about the U-Boot mailing list