[PATCH v4 4/5] watchdog: rti_wdt: Add support for loading firmware
Jan Kiszka
jan.kiszka at siemens.com
Fri Jul 30 20:21:31 CEST 2021
From: Jan Kiszka <jan.kiszka at siemens.com>
To avoid the need of extra boot scripting on AM65x for loading a
watchdog firmware, add the required rproc init and loading logic for the
first R5F core to the watchdog start handler. In case the R5F cluster is
in lock-step mode, also initialize the second core. The firmware itself
is embedded into U-Boot binary to ease access to it and ensure it is
properly hashed in case of secure boot.
One possible firmware source is https://github.com/siemens/k3-rti-wdt.
The board is responsible for providing the firmware as additional
loadable via the U-Boot fit image. The driver will pick up its location
from /fit-images/k3-rti-wdt-firmware then.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
drivers/watchdog/Kconfig | 20 +++++++++
drivers/watchdog/rti_wdt.c | 88 ++++++++++++++++++++++++++++++++++++++
2 files changed, 108 insertions(+)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f0ff2612a6..1a1fddfe9f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -209,6 +209,26 @@ config WDT_K3_RTI
Say Y here if you want to include support for the K3 watchdog
timer (RTI module) available in the K3 generation of processors.
+if WDT_K3_RTI
+
+config WDT_K3_RTI_LOAD_FW
+ bool "Load watchdog firmware"
+ depends on REMOTEPROC
+ help
+ Automatically load the specified firmware image into the MCU R5F
+ core 0. On the AM65x, this firmware is supposed to handle the expiry
+ of the watchdog timer, typically by resetting the system.
+
+config WDT_K3_RTI_FW_FILE
+ string "Watchdog firmware image file"
+ default "k3-rti-wdt.fw"
+ depends on WDT_K3_RTI_LOAD_FW
+ help
+ Firmware image to be embedded into U-Boot and loaded on watchdog
+ start.
+
+endif
+
config WDT_SANDBOX
bool "Enable Watchdog Timer support for Sandbox"
depends on SANDBOX && WDT
diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 8335b20ae8..253286d349 100644
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -11,9 +11,11 @@
#include <common.h>
#include <clk.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <power-domain.h>
#include <wdt.h>
#include <asm/io.h>
+#include <remoteproc.h>
/* Timer register set definition */
#define RTIDWDCTRL 0x90
@@ -42,6 +44,88 @@ struct rti_wdt_priv {
unsigned int clk_khz;
};
+#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
+#define RTI_WDT_FIT_PATH "/fit-images/k3-rti-wdt-firmware"
+
+static int rti_wdt_load_fw(struct udevice *dev)
+{
+ struct udevice *rproc_dev;
+ int primary_core, ret;
+ u32 cluster_mode;
+ ofnode node;
+ u64 rti_wdt_fw;
+ u32 rti_wdt_fw_size;
+
+ node = ofnode_path(RTI_WDT_FIT_PATH);
+ if (!ofnode_valid(node))
+ goto fit_error;
+
+ ret = ofnode_read_u64(node, "load", &rti_wdt_fw);
+ if (ret)
+ goto fit_error;
+ ret = ofnode_read_u32(node, "size", &rti_wdt_fw_size);
+ if (ret)
+ goto fit_error;
+
+ node = ofnode_by_compatible(ofnode_null(), "ti,am654-r5fss");
+ if (!ofnode_valid(node))
+ goto dt_error;
+
+ ret = ofnode_read_u32(node, "ti,cluster-mode", &cluster_mode);
+ if (ret)
+ cluster_mode = 1;
+
+ node = ofnode_by_compatible(node, "ti,am654-r5f");
+ if (!ofnode_valid(node))
+ goto dt_error;
+
+ ret = uclass_get_device_by_ofnode(UCLASS_REMOTEPROC, node, &rproc_dev);
+ if (ret)
+ return ret;
+
+ primary_core = dev_seq(rproc_dev);
+
+ ret = rproc_dev_init(primary_core);
+ if (ret)
+ goto fw_error;
+
+ if (cluster_mode == 1) {
+ ret = rproc_dev_init(primary_core + 1);
+ if (ret)
+ goto fw_error;
+ }
+
+ ret = rproc_load(primary_core, (ulong)rti_wdt_fw,
+ rti_wdt_fw_size);
+ if (ret)
+ goto fw_error;
+
+ ret = rproc_start(primary_core);
+ if (ret)
+ goto fw_error;
+
+ return 0;
+
+fit_error:
+ dev_err(dev, "No loadable firmware found under %s\n", RTI_WDT_FIT_PATH);
+ return -ENOENT;
+
+dt_error:
+ dev_err(dev, "No compatible firmware target processor found\n");
+ return -ENODEV;
+
+fw_error:
+ dev_err(dev, "Failed to load watchdog firmware into remote processor %d\n",
+ primary_core);
+ return ret;
+}
+#else
+static inline int rti_wdt_load_fw(struct udevice *dev)
+{
+ return 0;
+}
+#endif
+
static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
{
struct rti_wdt_priv *priv = dev_get_priv(dev);
@@ -51,6 +135,10 @@ static int rti_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
if (readl(priv->regs + RTIDWDCTRL) == WDENABLE_KEY)
return -EBUSY;
+ ret = rti_wdt_load_fw(dev);
+ if (ret < 0)
+ return ret;
+
timer_margin = timeout_ms * priv->clk_khz / 1000;
timer_margin >>= WDT_PRELOAD_SHIFT;
if (timer_margin > WDT_PRELOAD_MAX)
--
2.31.1
More information about the U-Boot
mailing list