[PATCH v3 2/5] arm/dts: k3-j7200-r5-common: Add pmic lp876441 node

[Grygorii Strashko]

On 14/07/2021 23:52, Gowtham Tammana wrote:
> Add pmic lp876411 node needed for CPU AVS support.
> 
> Signed-off-by: Gowtham Tammana <g-tammana at ti.com>
> ---
>   .../arm/dts/k3-j7200-r5-common-proc-board.dts | 26 +++++++++++++++++++
>   1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
> index 8dc1809979..6ef92145ef 100644
> --- a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
> +++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
> @@ -239,6 +239,32 @@
>   	ti,driver-strength-ohm = <50>;
>   };
>   
> +&wkup_i2c0 {
> +	u-boot,dm-spl;
> +	lp876441: lp876441 at 4c {
> +		compatible = "ti,lp876441";
> +		reg = <0x4c>;
> +		u-boot,dm-spl;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wkup_i2c0_pins_default>;
> +		clock-frequency = <400000>;

pls, send follow up fix to place pimux and freq props correctly in i2c node

> +
> +		regulators: regulators {
> +			u-boot,dm-spl;
> +			buck1_reg: buck1 {
> +				/*VDD_CPU_AVS_REG*/
> +				regulator-name = "buck1";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1250000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				u-boot,dm-spl;
> +			};
> +		};
> +	};
> +
> +};
> +
>   &main_i2c0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&main_i2c0_pins_default>;
> 

-- 
Best regards,
grygorii