[PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver

[Ilias Apalodimas]

> > >

[...]

> > > These definitions match Linux' tpm_tis_core.h.
> > >
> > > Should they be moved to an include of the same name in U-Boot?
> >
> > I got a tpm_tis.h in this series, so I might as well move those there
> >
> > >
> >
> > [...]
> >
> > > I would prefer if you would add these functions to a structure struct
> > > tpm_tis_phy_ops which you can use to pull out the core driver.
> >
> > Me too :).  In fact that matches the design I proposed over IRC.  I just
> > didn't have too much free time to fix it, so I went ahead and posted the
> > driver matching what's already in U-Boot.  That being said, what's proposed
> > here is the right was forward.  Basically if we do it like this then any
> > future TPM TIS driver will only have to define the read/write ops for the
> > underlyng bus.
> 
> I'm not sure about the irc side, but it is best to do things on the
> mailing list so people can see it.
> 
> There seems to be quite a bit of duplicated code in this new driver. I
> think it would be better to come up with the interface first, as
> Heinrich suggests. Would something like regmap be good enough?
> 

There's duplicated code in *every* TPM driver we have right now.  That..
includes the cr50 and the TPM2 spi implementation we have.  That's why I
posted it as is.
The interface you are looking for is the TIS described one from TCG.  I am
not sure if regmap is a good idea in that regard, but since I agree with
both of you that having an abstracted TIS core makes sense in general, I'll
go ahead and split my code.  Then we can take a step back and port the
remaining drivers to that.

Cheers
/Ilias
> Regards,
> Simon