[PATCH 2/2] arm: allwinner: r40: add devicetree for Forlinx FETA40i-C & OKA40i-C

Ivan Uvarov i.uvarov at cognitivepilot.com
Thu Jul 15 12:19:00 CEST 2021 

The FETA40i-C is a SoM by Forlinx based on the Allwinner R40/A40i.

SoM specifications:

- SoC: R40 or A40i
- PMIC: AXP221S
- RAM: 1GiB/2GiB DDR3 (dual-rank)
- eMMC: 8GB,
- Mates with carrier board via four 80-pin connectors (AXK6F80337YG).

OKA40i-C is a carrier board by the same manufacturer for this SoM,
whose main purpose is as a development board with a wide variety of
peripherals:

- Power: DC5V barrel or USB OTG or 4.2V Lipo battery
- Video out: HDMI, TV out, LVDS
- WiFi+Bluetooth: RL-UM02WBS-8723BU-V1.2 (802.11 b/g/n, BT V2.1/3.0/4.0)
- Ethernet: 10/100Mbps
- Storage: µSD, fullsize SD, eMMC (on SoM), SATA
- USB: 3 x USB2.0 Host (2 via hub, 1 native), 1 x USB2.0 OTG (micro-B)
- UART: RS232, RS485, 4 3.3v uarts (of which 2 have RTS/CTS)
- Other I/O: SPI x2, TWI, SDIO header, GPIO header, JTAG header
- Mini PCIe slot with sim holder for WLAN modem
- Smart card holder
- RTC (RX8010SJ)
- Two user LEDs
- Three user buttons (via KeyADC).

This patch adds a devicetree for the aforementioned SoM and devboard.
In order to reflect the modularity of this devboard and simplify adding
support for future hardware based on the same SoM, the devicetree is split:
Everything pertaining to the SoM itself is described in a separate .dtsi
file, which is included by the devboard's .dts.

Signed-off-by: Ivan Uvarov <i.uvarov at cognitivepilot.com>

 4 files changed, 346 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9fb38682e6..a6e6fd99c8 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -611,7 +611,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-rervision-dvk.dtb
 dtb-$(CONFIG_MACH_SUN8I_R40) += \
 	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
+	sun8i-v40-bananapi-m2-berry.dtb \
+	sun8i-r40-oka40i-c.dtb
 dtb-$(CONFIG_MACH_SUN8I_V3S) += \
 	sun8i-s3-pinecube.dtb \
 	sun8i-v3s-licheepi-zero.dtb
diff --git a/arch/arm/dts/sun8i-r40-feta40i.dtsi b/arch/arm/dts/sun8i-r40-feta40i.dtsi
new file mode 100644
index 0000000000..265e0fa57a
--- /dev/null
+++ b/arch/arm/dts/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov at cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens at csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+
+#include "sun8i-r40.dtsi"
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic at 34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/dts/sun8i-r40-oka40i-c.dts b/arch/arm/dts/sun8i-r40-oka40i-c.dts
new file mode 100644
index 0000000000..0bd1336206
--- /dev/null
+++ b/arch/arm/dts/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov at cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens at csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy at 1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/configs/OKA40i_defconfig b/configs/OKA40i_defconfig
new file mode 100644
index 0000000000..fbd54e3843
--- /dev/null
+++ b/configs/OKA40i_defconfig
@@ -0,0 +1,35 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_R40=y
+CONFIG_DRAM_CLK=576
+# CONFIG_DRAM_ZQ=0x003b3bfb
+#CONFIG_DRAM_EMR1=4
+#CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
+CONFIG_MMC0_CD_PIN="PI11"
+CONFIG_MMC3_CD_PIN="PI10"
+CONFIG_USB0_VBUS_DET="PH17"
+CONFIG_USB0_VBUS_PIN="PH13"
+CONFIG_USB0_ID_DET="PH21"
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN=""
+#CONFIG_USB1_VBUS_PIN="PH23"
+#CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-feta40i-c"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-r40-oka40i-c"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_AHCI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_SCSI_AHCI=y
+CONFIG_RGMII=y
+CONFIG_SUN4I_EMAC=y
+CONFIG_SUNXI_GMAC=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_AXP_ALDO2_VOLT=1800
+CONFIG_AXP_DLDO4_VOLT=2500
+#CONFIG_AXP_ELDO3_VOLT=1200
+CONFIG_AXP_ELDO2_VOLT=1200
+CONFIG_SCSI=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_DRV_RX8010=y
-- 
2.32.0

More information about the U-Boot mailing list