[PATCH] board: amlogic: vim3: fix phy-names property setup

[Neil Armstrong]

On 13/07/2021 08:48, Artem Lapkin wrote:
> phy-names was improperly implemented resulting in an inoperable USB-OTG
> port.
> 
> - phy-names = "usb2-phy0\0\0usb2-phy1\0";
> + phy-names = "usb2-phy0\0usb2-phy1";
> 
> Signed-off-by: Artem Lapkin <art at khadas.com>
> ---
>  board/amlogic/vim3/vim3.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
> index c8ebd676..6a67a39c 100644
> --- a/board/amlogic/vim3/vim3.c
> +++ b/board/amlogic/vim3/vim3.c
> @@ -109,8 +109,8 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
>  		}
>  
>  		/* Update PHY names (mandatory to disable USB3.0) */
> -		len = strlcpy(data, "usb2-phy0", 32) + 1;
> -		len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1;
> +		len = strlcpy(data, "usb2-phy0", 32);
> +		len += strlcpy(&data[len], "usb2-phy1", 32 - len);
>  		ret = fdt_setprop(blob, node, "phy-names", data, len);
>  		if (ret < 0) {
>  			printf("vim3: failed to update usb phy names property (%d)\n", ret);
> 


Applied to u-boot-amlogic,

Thanks,
Neil