[PATCH 3/4] [v2] configs: ls2080aqds.h: Update mc size in env

[Priyanka Jain]

Set MC Firmware size in read commands in
env to 2MB.
Update DDR Memory read address for MC firmware to
0x80a00000 and MC DPC address to 0x80e00000.

Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
changes for v2:
	updated MC fw, dpc address

 include/configs/ls2080aqds.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 41c1a86743..8bfe4b9811 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -340,7 +340,7 @@ unsigned long get_board_ddr_clk(void);
 #else
 #ifdef CONFIG_TFABOOT
 #define SD_MC_INIT_CMD				\
-	"mmcinfo;mmc read 0x80a00000 0x5000 0x1200;"  \
+	"mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
 	"mmc read 0x80e00000 0x7000 0x800;" \
 	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 #define IFC_MC_INIT_CMD				\
@@ -413,9 +413,9 @@ unsigned long get_board_ddr_clk(void);
 	"kernel_start=0x8000\0"              \
 	"kernel_load=0xa0000000\0"              \
 	"kernel_size=0x14000\0"               \
-	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
-	"mmc read 0x80100000 0x7000 0x800;" \
-	"fsl_mc start mc 0x80000000 0x80100000\0"       \
+	"mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;"  \
+	"mmc read 0x80e00000 0x7000 0x800;" \
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"       \
 	"mcmemsize=0x70000000 \0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
-- 
2.17.1