[PATCH v2 1/3] risv: add missing SBI extension definitions

Sean Anderson seanga2 at gmail.com
Wed Jul 21 19:02:10 CEST 2021


On 7/21/21 12:33 PM, Heinrich Schuchardt wrote:
> Add the System Reset Extension and the Hart State Management Extension
> definitions.
> 
> Add missing RFENCE Extension enum values.
> 
> The SBI 0.1 extension constants are needed for for the sbi command. Remove
> an #ifdef.
> 
> Cf. https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> 
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
> v2:
> 	correct constants that were blindly copied from Linux
> ---
>   arch/riscv/include/asm/sbi.h | 36 ++++++++++++++++++++++++++++++++++--
>   1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index 53ca316180..39d5a022e0 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -12,7 +12,6 @@
>   #include <linux/types.h>
> 
>   enum sbi_ext_id {
> -#ifdef CONFIG_SBI_V01
>   	SBI_EXT_0_1_SET_TIMER = 0x0,
>   	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
>   	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
> @@ -22,11 +21,12 @@ enum sbi_ext_id {
>   	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
>   	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
>   	SBI_EXT_0_1_SHUTDOWN = 0x8,
> -#endif
>   	SBI_EXT_BASE = 0x10,
>   	SBI_EXT_TIME = 0x54494D45,
>   	SBI_EXT_IPI = 0x735049,
>   	SBI_EXT_RFENCE = 0x52464E43,
> +	SBI_EXT_HSM = 0x48534D,
> +	SBI_EXT_SRST = 0x53525354,
>   };
> 
>   enum sbi_ext_base_fid {
> @@ -51,6 +51,38 @@ enum sbi_ext_rfence_fid {
>   	SBI_EXT_RFENCE_REMOTE_FENCE_I = 0,
>   	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
>   	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
> +	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
> +	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
> +	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID,
> +	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA,
> +};
> +
> +enum sbi_ext_hsm_fid {
> +	SBI_EXT_HSM_HART_START = 0,
> +	SBI_EXT_HSM_HART_STOP,
> +	SBI_EXT_HSM_HART_STATUS,
> +};
> +
> +enum sbi_hsm_hart_status {
> +	SBI_HSM_HART_STATUS_STARTED = 0,
> +	SBI_HSM_HART_STATUS_STOPPED,
> +	SBI_HSM_HART_STATUS_START_PENDING,
> +	SBI_HSM_HART_STATUS_STOP_PENDING,

Perhaps add the suspend states from https://github.com/riscv/riscv-sbi-doc/pull/66

> +};
> +
> +enum sbi_ext_srst_fid {
> +	SBI_EXT_SRST_RESET = 0,
> +};
> +
> +enum sbi_srst_reset_type {
> +	SBI_SRST_RESET_TYPE_SHUTDOWN = 0,
> +	SBI_SRST_RESET_TYPE_COLD_REBOOT,
> +	SBI_SRST_RESET_TYPE_WARM_REBOOT,
> +};
> +
> +enum sbi_srst_reset_reason {
> +	SBI_SRST_RESET_REASON_NONE = 0,
> +	SBI_SRST_RESET_REASON_SYS_FAILURE,
>   };
> 
>   #ifdef CONFIG_SBI_V01
> --
> 2.30.2
> 

Reviewed-by: Sean Anderson <seanga2 at gmail.com>


More information about the U-Boot mailing list