[PATCH v2 1/3] risv: add missing SBI extension definitions

[Leo Liang]

Hi Heinrich,

On Thu, Jul 22, 2021 at 01:02:10AM +0800, Sean Anderson wrote:
> On 7/21/21 12:33 PM, Heinrich Schuchardt wrote:
> > Add the System Reset Extension and the Hart State Management Extension
> > definitions.
> > 
> > Add missing RFENCE Extension enum values.
> > 
> > The SBI 0.1 extension constants are needed for for the sbi command. Remove
> > an #ifdef.
> > 
> > Cf. https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
> > 
> > Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> > ---
> > v2:
> > 	correct constants that were blindly copied from Linux
> > ---
> >   arch/riscv/include/asm/sbi.h | 36 ++++++++++++++++++++++++++++++++++--
> >   1 file changed, 34 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> > index 53ca316180..39d5a022e0 100644
> > --- a/arch/riscv/include/asm/sbi.h
> > +++ b/arch/riscv/include/asm/sbi.h
> > @@ -12,7 +12,6 @@
> >   #include <linux/types.h>
> > 
> >   enum sbi_ext_id {
> > -#ifdef CONFIG_SBI_V01
> >   	SBI_EXT_0_1_SET_TIMER = 0x0,
> >   	SBI_EXT_0_1_CONSOLE_PUTCHAR = 0x1,
> >   	SBI_EXT_0_1_CONSOLE_GETCHAR = 0x2,
> > @@ -22,11 +21,12 @@ enum sbi_ext_id {
> >   	SBI_EXT_0_1_REMOTE_SFENCE_VMA = 0x6,
> >   	SBI_EXT_0_1_REMOTE_SFENCE_VMA_ASID = 0x7,
> >   	SBI_EXT_0_1_SHUTDOWN = 0x8,
> > -#endif
> >   	SBI_EXT_BASE = 0x10,
> >   	SBI_EXT_TIME = 0x54494D45,
> >   	SBI_EXT_IPI = 0x735049,
> >   	SBI_EXT_RFENCE = 0x52464E43,
> > +	SBI_EXT_HSM = 0x48534D,
> > +	SBI_EXT_SRST = 0x53525354,
> >   };
> > 
> >   enum sbi_ext_base_fid {
> > @@ -51,6 +51,38 @@ enum sbi_ext_rfence_fid {
> >   	SBI_EXT_RFENCE_REMOTE_FENCE_I = 0,
> >   	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA,
> >   	SBI_EXT_RFENCE_REMOTE_SFENCE_VMA_ASID,
> > +	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA_VMID,
> > +	SBI_EXT_RFENCE_REMOTE_HFENCE_GVMA,
> > +	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA_ASID,
> > +	SBI_EXT_RFENCE_REMOTE_HFENCE_VVMA,
> > +};
> > +
> > +enum sbi_ext_hsm_fid {
> > +	SBI_EXT_HSM_HART_START = 0,
> > +	SBI_EXT_HSM_HART_STOP,
> > +	SBI_EXT_HSM_HART_STATUS,
> > +};
> > +
> > +enum sbi_hsm_hart_status {
> > +	SBI_HSM_HART_STATUS_STARTED = 0,
> > +	SBI_HSM_HART_STATUS_STOPPED,
> > +	SBI_HSM_HART_STATUS_START_PENDING,
> > +	SBI_HSM_HART_STATUS_STOP_PENDING,
> 
> Perhaps add the suspend states from https://github.com/riscv/riscv-sbi-doc/pull/66

+1

> 
> > +};
> > +
> > +enum sbi_ext_srst_fid {
> > +	SBI_EXT_SRST_RESET = 0,
> > +};
> > +
> > +enum sbi_srst_reset_type {
> > +	SBI_SRST_RESET_TYPE_SHUTDOWN = 0,
> > +	SBI_SRST_RESET_TYPE_COLD_REBOOT,
> > +	SBI_SRST_RESET_TYPE_WARM_REBOOT,
> > +};
> > +
> > +enum sbi_srst_reset_reason {
> > +	SBI_SRST_RESET_REASON_NONE = 0,
> > +	SBI_SRST_RESET_REASON_SYS_FAILURE,
> >   };
> > 
> >   #ifdef CONFIG_SBI_V01
> > --
> > 2.30.2
> > 
> 
> Reviewed-by: Sean Anderson <seanga2 at gmail.com>

Best regards,
Leo