[PATCH v3 9/9] board: phytec: imx8mp-phycore: Switch to binman

[Teresa Remmet]

Use now binman for image creation.

Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
Reviewed-by: Fabio Estevam <festevam at gmail.com>
Reviewed-by: Heiko Schocher <hs at denx.de>
---
Changes in v3:
- binman nodes have been moved to common dtsi so removed from this patch
Changes in v2:
- none

 arch/arm/mach-imx/imx8m/Kconfig                 |  1 +
 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg | 10 ++++++++++
 configs/phycore-imx8mp_defconfig                |  4 ++--
 3 files changed, 13 insertions(+), 2 deletions(-)
 create mode 100644 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg

diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
index 0669363c0f51..ccaf106be5d8 100644
--- a/arch/arm/mach-imx/imx8m/Kconfig
+++ b/arch/arm/mach-imx/imx8m/Kconfig
@@ -127,6 +127,7 @@ config TARGET_PHYCORE_IMX8MM
 
 config TARGET_PHYCORE_IMX8MP
 	bool "PHYTEC PHYCORE i.MX8MP"
+	select BINMAN
 	select IMX8MP
         select SUPPORT_SPL
 	select IMX8M_LPDDR4
diff --git a/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg
new file mode 100644
index 000000000000..b2920b4908ed
--- /dev/null
+++ b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#define __ASSEMBLY__
+
+ROM_VERSION	v2
+BOOT_FROM	sd
+LOADER		mkimage.flash.mkimage	0x920000
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 89c2ac977f47..32d538c8bbbb 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -20,9 +20,9 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mp-lpddr4.cfg"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
-- 
2.25.1