[PATCH] xilinx: zynqmp: Reset usb and scsi via preboot

[Michal Simek]

Based on thread
https://lists.denx.de/pipermail/u-boot/2021-June/451828.html
especially
"Overall we have a deficiency in the UEFI implementation in that we
cannot deal with block devices added or removed after initialization."
there is a need to deal with removable media as usb/scsi/sata.

That's why bridge this gap in EFI implementation by resetting usb and
scsi resets to get all disks before efi_init_obj_list() is called.

In our standard boot flow, where we use distro boot, order is fixed as
"jtag mmc0 mmc1 qspi0 nand0 usb0 usb1 scsi0 pxe dhcp" with prioritizing
boot device added by commit 2882b39d564b ("arm64: zynqmp: Setup the first
boot_target at run time").
When device has ESP partition all devices should be detected because then
efi_disk_register() in efi_init_obj_list() is called only once.

The first such a device is sd/emmc(mmc0/mmc1) and then disks on usb/sata
are not handled at all.

The commit 6bb577dbb30f ("arm64: zynqmp: Disable
EFI_CAPSULE_ON_DISK_EARLY") also pointed out on this issue but detection of
removable media wasn't solved that's why do it now via preboot command.

I have tested cases without usb and scsi and there is no problem with
calling resets without devices itself.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 configs/xilinx_zynqmp_virt_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 43ab4e7bd990..748e6d668654 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -22,6 +22,7 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
 CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="scsi reset;usb reset"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
-- 
2.32.0