[PATCH v2 3/5] arm: stm32mp: add defconfig for trusted boot with FIP
Patrick Delaunay
patrick.delaunay at foss.st.com
Thu Jul 15 17:22:05 CEST 2021
Add TF-A FIP support for trusted boot on STM32MP15x,
when STM32MP15x_STM32IMAGE is not activated.
With FIP support the SSBL partition is named "fip" and its size is 4MB,
so the ENV partition name in device tree (for SD card or eMMC)
or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND)
need to be modified.
With FIP the TEE MTD partitions are removed because the OP-TEE binray are
included in the FIP containers.
Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
Changes in v2:
- synchronize defconfig with latest change
arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 6 +-
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 6 +-
board/st/common/Kconfig | 21 ++-
board/st/common/stm32mp_mtdparts.c | 31 +++--
board/st/stm32mp1/MAINTAINERS | 1 +
configs/stm32mp15_defconfig | 158 +++++++++++++++++++++++
6 files changed, 207 insertions(+), 16 deletions(-)
create mode 100644 configs/stm32mp15_defconfig
diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
index 36d166a0e1..f554d9359b 100644
--- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
@@ -15,13 +15,17 @@
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
- u-boot,mmc-env-partition = "ssbl";
+ u-boot,mmc-env-partition = "fip";
st,adc_usb_pd = <&adc1 18>, <&adc1 19>;
st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
};
#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ config {
+ u-boot,mmc-env-partition = "ssbl";
+ };
+
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index e5a1cb7084..69eb285bf7 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -15,12 +15,16 @@
config {
u-boot,boot-led = "heartbeat";
u-boot,error-led = "error";
- u-boot,mmc-env-partition = "ssbl";
+ u-boot,mmc-env-partition = "fip";
st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
};
#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ config {
+ u-boot,mmc-env-partition = "ssbl";
+ };
+
/* only needed for boot with TF-A, witout FIP support */
firmware {
optee {
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index ddcf33a122..2f57118bb2 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -8,18 +8,22 @@ config CMD_STBOARD
config MTDPARTS_NAND0_BOOT
string "mtd boot partitions for nand0"
- default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
+ default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || \
+ !TFABOOT
+ default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
for boot from nand0.
Each partition need to be aligned with the device erase block size,
512KB is the max size for the NAND supported by stm32mp1 platform.
+ The fsbl partition support multiple copy of the same binary, one by
+ erase block.
config MTDPARTS_NAND0_TEE
string "mtd tee partitions for nand0"
default "512k(teeh),512k(teed),512k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nand0.
@@ -28,7 +32,9 @@ config MTDPARTS_NAND0_TEE
config MTDPARTS_NOR0_BOOT
string "mtd boot partitions for nor0"
- default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)"
+ default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15x_STM32IMAGE || \
+ !TFABOOT
+ default "256k(fsbl1),256k(fsbl2),4m(fip),512k(u-boot-env)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
@@ -40,24 +46,27 @@ config MTDPARTS_NOR0_BOOT
config MTDPARTS_NOR0_TEE
string "mtd tee partitions for nor0"
default "256k(teeh),512k(teed),256k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from nor0.
config MTDPARTS_SPINAND0_BOOT
string "mtd boot partitions for spi-nand0"
- default "2m(fsbl),2m(ssbl1),2m(ssbl2)"
+ default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || !TFABOOT
+ default "2m(fsbl),4m(fip1),4m(fip2)"
depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
help
This define the partitions of nand0 used to build mtparts dynamically
for boot from spi-nand0,
512KB is the max size for the NAND supported by stm32mp1 platform.
+ The fsbl partition support multiple copy of the same binary, one by
+ erase block.
config MTDPARTS_SPINAND0_TEE
string "mtd tee partitions for spi-nand0"
default "512k(teeh),512k(teed),512k(teex)"
- depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP
+ depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE
help
This define the tee partitions added in mtparts dynamically
when tee is supported with boot from spi-nand0,
diff --git a/board/st/common/stm32mp_mtdparts.c b/board/st/common/stm32mp_mtdparts.c
index f074fc189d..8b636d62fa 100644
--- a/board/st/common/stm32mp_mtdparts.c
+++ b/board/st/common/stm32mp_mtdparts.c
@@ -11,7 +11,9 @@
#include <log.h>
#include <mtd.h>
#include <mtd_node.h>
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
#include <tee.h>
+#endif
#include <asm/arch/stm32prog.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
@@ -31,7 +33,9 @@ static void board_set_mtdparts(const char *dev,
char *mtdids,
char *mtdparts,
const char *boot,
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
const char *tee,
+#endif
const char *user)
{
/* mtdids: "<dev>=<dev>, ...." */
@@ -55,10 +59,12 @@ static void board_set_mtdparts(const char *dev,
strncat(mtdparts, ",", MTDPARTS_LEN);
}
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
if (tee) {
strncat(mtdparts, tee, MTDPARTS_LEN);
strncat(mtdparts, ",", MTDPARTS_LEN);
}
+#endif
strncat(mtdparts, user, MTDPARTS_LEN);
}
@@ -70,7 +76,10 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
static char parts[3 * MTDPARTS_LEN + 1];
static char ids[MTDIDS_LEN + 1];
static bool mtd_initialized;
- bool tee, nor, nand, spinand, serial;
+ bool nor, nand, spinand, serial;
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ bool tee = false;
+#endif
if (mtd_initialized) {
*mtdids = ids;
@@ -78,7 +87,6 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
return;
}
- tee = false;
nor = false;
nand = false;
spinand = false;
@@ -89,7 +97,9 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
case BOOT_SERIAL_USB:
serial = true;
if (CONFIG_IS_ENABLED(CMD_STM32PROG)) {
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
tee = stm32prog_get_tee_partitions();
+#endif
nor = stm32prog_get_fsbl_nor();
}
nand = true;
@@ -108,9 +118,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
break;
}
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
if (!serial && CONFIG_IS_ENABLED(OPTEE) &&
tee_find_device(NULL, NULL, NULL, NULL))
tee = true;
+#endif
memset(parts, 0, sizeof(parts));
memset(ids, 0, sizeof(ids));
@@ -125,10 +137,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (nand) {
mtd = get_mtd_device_nm("nand0");
if (!IS_ERR_OR_NULL(mtd)) {
- const char *mtd_tee = CONFIG_MTDPARTS_NAND0_TEE;
board_set_mtdparts("nand0", ids, parts,
CONFIG_MTDPARTS_NAND0_BOOT,
- !nor && tee ? mtd_tee : NULL,
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ !nor && tee ? CONFIG_MTDPARTS_NAND0_TEE : NULL,
+#endif
"-(UBI)");
put_mtd_device(mtd);
}
@@ -137,10 +150,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (spinand) {
mtd = get_mtd_device_nm("spi-nand0");
if (!IS_ERR_OR_NULL(mtd)) {
- const char *mtd_tee = CONFIG_MTDPARTS_SPINAND0_TEE;
board_set_mtdparts("spi-nand0", ids, parts,
CONFIG_MTDPARTS_SPINAND0_BOOT,
- !nor && tee ? mtd_tee : NULL,
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ !nor && tee ? CONFIG_MTDPARTS_SPINAND0_TEE : NULL,
+#endif
"-(UBI)");
put_mtd_device(mtd);
}
@@ -148,10 +162,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)
if (nor) {
if (!uclass_get_device(UCLASS_SPI_FLASH, 0, &dev)) {
- const char *mtd_tee = CONFIG_MTDPARTS_NOR0_TEE;
board_set_mtdparts("nor0", ids, parts,
CONFIG_MTDPARTS_NOR0_BOOT,
- tee ? mtd_tee : NULL,
+#ifdef CONFIG_STM32MP15x_STM32IMAGE
+ tee ? CONFIG_MTDPARTS_NOR0_TEE : NULL,
+#endif
"-(nor_user)");
}
}
diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
index fe8fc6f484..0e6d80fb45 100644
--- a/board/st/stm32mp1/MAINTAINERS
+++ b/board/st/stm32mp1/MAINTAINERS
@@ -5,6 +5,7 @@ T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git
S: Maintained
F: arch/arm/dts/stm32mp15*
F: board/st/stm32mp1/
+F: configs/stm32mp15_defconfig
F: configs/stm32mp15_basic_defconfig
F: configs/stm32mp15_trusted_defconfig
F: include/configs/stm32mp1.h
diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
new file mode 100644
index 0000000000..b11da7dc9f
--- /dev/null
+++ b/configs/stm32mp15_defconfig
@@ -0,0 +1,158 @@
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_TFABOOT=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
+CONFIG_SYS_MEMTEST_START=0xc0000000
+CONFIG_SYS_MEMTEST_END=0xc4000000
+CONFIG_ENV_OFFSET=0x480000
+CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_TARGET_ST_STM32MP15x=y
+CONFIG_CMD_STM32KEY=y
+CONFIG_CMD_STM32PROG=y
+CONFIG_ENV_OFFSET_REDUND=0x4C0000
+CONFIG_TYPEC_STUSB160X=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=1
+CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_SYS_PROMPT="STM32MP> "
+CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_UNZIP=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_RNG=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_LOG=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_LIVE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_ENV_UBI_PART="UBI"
+CONFIG_ENV_UBI_VOLUME="uboot_config"
+CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=-1
+CONFIG_STM32_ADC=y
+CONFIG_CLK_SCMI=y
+CONFIG_SET_DFU_ALT_INFO=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
+CONFIG_FASTBOOT_BUF_SIZE=0x02000000
+CONFIG_FASTBOOT_USB_DEV=1
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc1boot0"
+CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc1boot1"
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_NAME="mmc1"
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y
+CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y
+CONFIG_GPIO_HOG=y
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MAILBOX=y
+CONFIG_STM32_IPCC=y
+CONFIG_STM32_FMC2_EBI=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_SYS_MTDPARTS_RUNTIME=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_STM32_FMC2=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_WINBOND=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_PHY=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_STPMIC1=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_REGULATOR_STM32_VREFBUF=y
+CONFIG_DM_REGULATOR_STPMIC1=y
+CONFIG_REMOTEPROC_STM32_COPRO=y
+CONFIG_RESET_SCMI=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_STM32MP1=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_STM32=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_STM32_QSPI=y
+CONFIG_STM32_SPI=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+# CONFIG_OPTEE_TA_AVB is not set
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0483
+CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_DM_VIDEO=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
+CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
+CONFIG_VIDEO_STM32=y
+CONFIG_VIDEO_STM32_DSI=y
+CONFIG_VIDEO_STM32_MAX_XRES=1280
+CONFIG_VIDEO_STM32_MAX_YRES=800
+CONFIG_VIDEO_BMP_RLE8=y
+CONFIG_BMP_16BPP=y
+CONFIG_BMP_24BPP=y
+CONFIG_BMP_32BPP=y
+CONFIG_WDT=y
+CONFIG_WDT_STM32MP=y
+CONFIG_ERRNO_STR=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
+# CONFIG_LMB_USE_MAX_REGIONS is not set
+CONFIG_LMB_MEMORY_REGIONS=2
+CONFIG_LMB_RESERVED_REGIONS=16
--
2.25.1
More information about the U-Boot
mailing list