[PATCH 4/5] arm: mvebu: axp: Set CONFIG_SYS_TCLK globally

[Pali Rohár]

This mvebu axp platform always uses fixed 250 MHz TCLK. So specify this
CONFIG_SYS_TCLK option in msys section of global file soc.h file instead of
manual configuration in every board file.

Now every #if-#else case of soc.h file defines CONFIG_SYS_TCLK, so remove
useless default CONFIG_SYS_TCLK value from the end of soc.h file.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 arch/arm/mach-mvebu/include/mach/soc.h | 3 ---
 include/configs/db-mv784mp-gp.h        | 1 -
 include/configs/ds414.h                | 1 -
 include/configs/maxbcm.h               | 1 -
 include/configs/theadorable.h          | 1 -
 5 files changed, 7 deletions(-)

diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index e29c0f32c3de..8e8a4058550e 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -208,10 +208,7 @@
 
 #define BOOT_FROM_UART		0x2
 #define BOOT_FROM_SPI		0x3
-#endif
 
-/* TCLK Core Clock definition */
-#ifndef CONFIG_SYS_TCLK
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 #endif
 
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index ef7eebd081f9..f1b79e8a1fb8 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -16,7 +16,6 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /* I2C */
 #define CONFIG_SYS_I2C
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 4bbb244fa227..9fe830965854 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -18,7 +18,6 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /* I2C */
 #define CONFIG_SYS_I2C
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 0c2185c529f7..a8cffcb82d43 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -15,7 +15,6 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /* I2C */
 #define CONFIG_SYS_I2C
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
index 31852fb24801..54e60a4094f8 100644
--- a/include/configs/theadorable.h
+++ b/include/configs/theadorable.h
@@ -15,7 +15,6 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
  * The debugging version enables USB support via defconfig.
-- 
2.20.1