[PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC

[Stefan Roese]

On 14.07.21 16:37, Pali Rohár wrote:
> Add a new 'quiet' argument to mmc_get_op_cond() function which avoids
> printing error message when SD/eMMC card is not detected.
> 
> Espressobin and mx6cuboxi boards use this function for detecting presence
> of eMMC and therefore it is expected and normal that eMMC does not have to
> be connected. So error message "Card did not respond to voltage select!"
> should be skipped in this case as it is not an error.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   board/Marvell/mvebu_armada-37xx/board.c | 2 +-
>   board/solidrun/mx6cuboxi/mx6cuboxi.c    | 2 +-
>   drivers/mmc/mmc.c                       | 7 ++++---
>   include/mmc.h                           | 3 ++-
>   4 files changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 6086996b8062..fdc873b1952f 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -124,7 +124,7 @@ int board_late_init(void)
>   
>   	/* eMMC is mmc dev num 1 */
>   	mmc_dev = find_mmc_device(1);
> -	emmc = (mmc_dev && mmc_get_op_cond(mmc_dev) == 0);
> +	emmc = (mmc_dev && mmc_get_op_cond(mmc_dev, true) == 0);
>   
>   	/* if eMMC is not present then remove it from DM */
>   	if (!emmc && mmc_dev) {
> diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
> index 3eadc38f6fd4..6207bf8253ab 100644
> --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
> +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
> @@ -374,7 +374,7 @@ static bool has_emmc(void)
>   	mmc = find_mmc_device(2);
>   	if (!mmc)
>   		return 0;
> -	return (mmc_get_op_cond(mmc) < 0) ? 0 : 1;
> +	return (mmc_get_op_cond(mmc, true) < 0) ? 0 : 1;
>   }
>   
>   int checkboard(void)
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 1e83007286b2..8078a89f18cb 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -2766,7 +2766,7 @@ static int mmc_power_cycle(struct mmc *mmc)
>   	return mmc_power_on(mmc);
>   }
>   
> -int mmc_get_op_cond(struct mmc *mmc)
> +int mmc_get_op_cond(struct mmc *mmc, bool quiet)
>   {
>   	bool uhs_en = supports_uhs(mmc->cfg->host_caps);
>   	int err;
> @@ -2842,7 +2842,8 @@ retry:
>   
>   		if (err) {
>   #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
> -			pr_err("Card did not respond to voltage select! : %d\n", err);
> +			if (!quiet)
> +				pr_err("Card did not respond to voltage select! : %d\n", err);
>   #endif
>   			return -EOPNOTSUPP;
>   		}
> @@ -2882,7 +2883,7 @@ int mmc_start_init(struct mmc *mmc)
>   		return -ENOMEDIUM;
>   	}
>   
> -	err = mmc_get_op_cond(mmc);
> +	err = mmc_get_op_cond(mmc, false);
>   
>   	if (!err)
>   		mmc->init_in_progress = 1;
> diff --git a/include/mmc.h b/include/mmc.h
> index 6f943e78b740..0bf19de20e52 100644
> --- a/include/mmc.h
> +++ b/include/mmc.h
> @@ -900,9 +900,10 @@ int mmc_set_bkops_enable(struct mmc *mmc);
>    * the presence of SD/eMMC when no card detect logic is available.
>    *
>    * @param mmc	Pointer to a MMC device struct
> + * @param quiet	Be quiet, do not print error messages when card is not detected.
>    * @return 0 on success, <0 on error.
>    */
> -int mmc_get_op_cond(struct mmc *mmc);
> +int mmc_get_op_cond(struct mmc *mmc, bool quiet);
>   
>   /**
>    * Start device initialization and return immediately; it does not block on
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de