[PATCH 1/3] board: dragonboard410c: Fix PHYS_SDRAM_1_SIZE
Ramon Fried
rfried.dev at gmail.com
Wed Jul 14 22:37:41 CEST 2021
On Wed, Jul 14, 2021 at 11:56 AM Stephan Gerhold <stephan at gerhold.net> wrote:
>
> The DragonBoard 410c has proprietary firmware from Qualcomm that
> reserves 8 MiB of memory for tz/smem/hyp/rmtfs/rfsa from 0x86000000
> to 0x86800000. I'm not aware of any ATF (ARM Trusted Firmware) port
> for DB410c that would reserve 30 MiB of memory at the end of RAM.
> I suspect the comment might have been copied from hikey.h which has
> a very similar comment (and which actually does have an ATF port).
>
> Reducing the memory size just prevents U-Boot from using the end of
> the RAM, not the reserved region inbetween. Therefore we might as well
> display the correct DRAM size (1 GiB) instead of strange 986 MiB.
>
> Fixes: 626f048bbc14 ("board: Add Qualcomm Dragonboard 410C support")
> Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
> ---
>
> include/configs/dragonboard410c.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
> index 1f08508c4d..6474e57b29 100644
> --- a/include/configs/dragonboard410c.h
> +++ b/include/configs/dragonboard410c.h
> @@ -16,8 +16,8 @@
>
> /* Physical Memory Map */
> #define PHYS_SDRAM_1 0x80000000
> -/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
> -#define PHYS_SDRAM_1_SIZE 0x3da00000
> +/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
> +#define PHYS_SDRAM_1_SIZE SZ_1G
> #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
> #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
> --
> 2.32.0
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
More information about the U-Boot
mailing list