[PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe

[Tim Harvey]

On Thu, Jul 1, 2021 at 5:41 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Tim.
>
> On Thu, Jun 3, 2021 at 12:50 PM Tim Harvey <tharvey at gateworks.com> wrote:
>
> > Marek,
> >
> > Is there something you want me to change here?
> >
> > I am happy to test gadget support as my board has an OTG connector.
> > Could you give me some pointers on how to configure a gadget in U-Boot
> > in order to test?
>
> One quick way to test gadget support is via the "ums 0 mmc 0" command.
>
> This will mount the eMMC content via USB mass storage device on the PC.
>
> You can check configs/warp7_defconfig for an example on how to select
> the USB gadget options.
>
> I applied this one and tested on a imx7s-warp board via "ums 0 mmc 0".
>
> Tested-by: Fabio Estevam <festevam at gmail.com>
>
> I am interested in getting USB gadget support in imx8mm too.
>

Fabio,

Right - I finally remembered that earlier today and just sent a v2 of
this series showing that I indeed tested that on both imx6q and
imx8mm. When you get a chance please show your Tested-by on that
thread.

Tim