[PATCH 1/3] arm: a37xx: pci: Extend validation for PCIe resources and oubound windows

Stefan Roese sr at denx.de
Thu Jul 15 12:33:19 CEST 2021


On 08.07.21 20:18, Pali Rohár wrote:
> Remapped address of PCIe outbound window may have set only bits from the
> mask. Add additional check that remapped address which is calculated from
> PCIe bus address specified in DTS file is valid.
> 
> Remove also useless clearing of low 16 bits in win_mask. As win_size is
> power of two and is at least 0x10000 it means that it always has zero low
> 16 bits.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

All patches:

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   drivers/pci/pci-aardvark.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
> index 96aa039bdc26..77ce9d0c8d87 100644
> --- a/drivers/pci/pci-aardvark.c
> +++ b/drivers/pci/pci-aardvark.c
> @@ -609,21 +609,22 @@ static void pcie_advk_set_ob_region(struct pcie_advk *pcie, int *wins,
>   	 * match with given mask.
>   	 * So every PCIe window size must be a power of two and every start
>   	 * address must be aligned to window size. Minimal size is 64 KiB
> -	 * because lower 16 bits of mask must be zero.
> +	 * because lower 16 bits of mask must be zero. Remapped address
> +	 * may have set only bits from the mask.
>   	 */
>   	while (*wins < OB_WIN_COUNT && size > 0) {
>   		/* Calculate the largest aligned window size */
>   		win_size = (1ULL << (fls64(size) - 1)) |
>   			   (phys_start ? (1ULL << __ffs64(phys_start)) : 0);
>   		win_size = 1ULL << __ffs64(win_size);
> -		if (win_size < 0x10000)
> +		win_mask = ~(win_size - 1);
> +		if (win_size < 0x10000 || (bus_start & ~win_mask))
>   			break;
>   
>   		dev_dbg(pcie->dev,
>   			"Configuring PCIe window %d: [0x%llx-0x%llx] as 0x%x\n",
>   			*wins, (u64)phys_start, (u64)phys_start + win_size,
>   			actions);
> -		win_mask = ~(win_size - 1) & ~0xffff;
>   		pcie_advk_set_ob_win(pcie, *wins, phys_start, bus_start,
>   				     win_mask, actions);
>   
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list