[PATCH 21/33] pci: Drop DM_PCI check from bios_emul

Simon Glass sjg at chromium.org
Mon Jul 26 15:34:27 CEST 2021


We don't need these checks anymore since when PCI is enabled, driver model
is always used.

Drop them.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 drivers/bios_emulator/atibios.c | 98 ---------------------------------
 drivers/bios_emulator/bios.c    | 39 -------------
 include/bios_emul.h             | 16 ------
 3 files changed, 153 deletions(-)

diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c
index 6c7cc24cbd9..9547470a2f7 100644
--- a/drivers/bios_emulator/atibios.c
+++ b/drivers/bios_emulator/atibios.c
@@ -230,19 +230,12 @@ This function executes the BIOS POST code on the controller. We assume that
 at this stage the controller has its I/O and memory space enabled and
 that all other controllers are in a disabled state.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 static void PCI_doBIOSPOST(struct udevice *pcidev, BE_VGAInfo *vga_info,
 			   int vesa_mode, struct vbe_mode_info *mode_info)
-#else
-static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
-			   int vesa_mode, struct vbe_mode_info *mode_info)
-#endif
 {
 	RMREGS regs;
 	RMSREGS sregs;
-#ifdef CONFIG_DM_PCI
 	pci_dev_t bdf;
-#endif
 
 	/* Determine the value to store in AX for BIOS POST. Per the PCI specs,
 	 AH must contain the bus and AL must contain the devfn, encoded as
@@ -250,14 +243,9 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info,
 	 */
 	memset(&regs, 0, sizeof(regs));
 	memset(&sregs, 0, sizeof(sregs));
-#ifdef CONFIG_DM_PCI
 	bdf = dm_pci_get_bdf(pcidev);
 	regs.x.ax = (int)PCI_BUS(bdf) << 8 |
 			(int)PCI_DEV(bdf) << 3 | (int)PCI_FUNC(bdf);
-#else
-	regs.x.ax = ((int)PCI_BUS(pcidev) << 8) |
-	    ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev);
-#endif
 	/*Setup the X86 emulator for the VGA BIOS*/
 	BE_setVGA(vga_info);
 
@@ -300,28 +288,15 @@ NOTE: This function leaves the original memory aperture disabled by leaving
       it programmed to all 1's. It must be restored to the correct value
       later.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 static u32 PCI_findBIOSAddr(struct udevice *pcidev, int *bar)
-#else
-static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar)
-#endif
 {
 	u32 base, size;
 
 	for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) {
-#ifdef CONFIG_DM_PCI
 		dm_pci_read_config32(pcidev, *bar, &base);
-#else
-		pci_read_config_dword(pcidev, *bar, &base);
-#endif
 		if (!(base & 0x1)) {
-#ifdef CONFIG_DM_PCI
 			dm_pci_write_config32(pcidev, *bar, 0xFFFFFFFF);
 			dm_pci_read_config32(pcidev, *bar, &size);
-#else
-			pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF);
-			pci_read_config_dword(pcidev, *bar, &size);
-#endif
 			size = ~(size & ~0xFF) + 1;
 			if (size >= MAX_BIOSLEN)
 				return base & ~0xFF;
@@ -344,19 +319,11 @@ necessary).
 Anyway to fix this we change all I/O mapped base registers and
 chop off the top bits.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 static void PCI_fixupIObase(struct udevice *pcidev, int reg, u32 *base)
-#else
-static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base)
-#endif
 {
 	if ((*base & 0x1) && (*base > 0xFFFE)) {
 		*base &= 0xFFFF;
-#ifdef CONFIG_DM_PCI
 		dm_pci_write_config32(pcidev, reg, *base);
-#else
-		pci_write_config_dword(pcidev, reg, *base);
-#endif
 
 	}
 }
@@ -371,30 +338,18 @@ Pointers to the mapped BIOS image
 REMARKS:
 Maps a pointer to the BIOS image on the graphics card on the PCI bus.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 void *PCI_mapBIOSImage(struct udevice *pcidev)
-#else
-void *PCI_mapBIOSImage(pci_dev_t pcidev)
-#endif
 {
 	u32 BIOSImageBus;
 	int BIOSImageBAR;
 	u8 *BIOSImage;
 
 	/*Save PCI BAR registers that might get changed*/
-#ifdef CONFIG_DM_PCI
 	dm_pci_read_config32(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
 	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
 	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
 	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
 	dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
-#else
-	pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress);
-	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10);
-	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14);
-	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18);
-	pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20);
-#endif
 
 	/*Fix up I/O base registers to less than 64K */
 	if(saveBaseAddress14 != 0)
@@ -413,21 +368,12 @@ void *PCI_mapBIOSImage(pci_dev_t pcidev)
 		return NULL;
 	}
 
-#ifdef CONFIG_DM_PCI
 	BIOSImage = dm_pci_bus_to_virt(pcidev, BIOSImageBus,
 				       PCI_REGION_MEM, 0, MAP_NOCACHE);
 
 	/*Change the PCI BAR registers to map it onto the bus.*/
 	dm_pci_write_config32(pcidev, BIOSImageBAR, 0);
 	dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
-#else
-	BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus,
-				    PCI_REGION_MEM, 0, MAP_NOCACHE);
-
-	/*Change the PCI BAR registers to map it onto the bus.*/
-	pci_write_config_dword(pcidev, BIOSImageBAR, 0);
-	pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1);
-#endif
 	udelay(1);
 
 	/*Check that the BIOS image is valid. If not fail, or return the
@@ -447,7 +393,6 @@ pcidev	- PCI device info for the video card on the bus
 REMARKS:
 Unmaps the BIOS image for the device and restores framebuffer mappings
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage)
 {
 	dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
@@ -456,16 +401,6 @@ void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage)
 	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
 	dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
 }
-#else
-void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage)
-{
-	pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress);
-	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10);
-	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14);
-	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18);
-	pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20);
-}
-#endif
 
 /****************************************************************************
 PARAMETERS:
@@ -479,22 +414,14 @@ REMARKS:
 Loads and POST's the display controllers BIOS, directly from the BIOS
 image we can extract over the PCI bus.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 static int PCI_postController(struct udevice *pcidev, uchar *bios_rom,
 			      int bios_len, BE_VGAInfo *vga_info,
 			      int vesa_mode, struct vbe_mode_info *mode_info)
-#else
-static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
-			      BE_VGAInfo *vga_info, int vesa_mode,
-			      struct vbe_mode_info *mode_info)
-#endif
 {
 	u32 bios_image_len;
 	uchar *mapped_bios;
 	uchar *copy_of_bios;
-#ifdef CONFIG_DM_PCI
 	pci_dev_t bdf;
-#endif
 
 	if (bios_rom) {
 		copy_of_bios = bios_rom;
@@ -522,16 +449,10 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 	}
 
 	/*Save information in vga_info structure*/
-#ifdef CONFIG_DM_PCI
 	bdf = dm_pci_get_bdf(pcidev);
 	vga_info->function = PCI_FUNC(bdf);
 	vga_info->device = PCI_DEV(bdf);
 	vga_info->bus = PCI_BUS(bdf);
-#else
-	vga_info->function = PCI_FUNC(pcidev);
-	vga_info->device = PCI_DEV(pcidev);
-	vga_info->bus = PCI_BUS(pcidev);
-#endif
 	vga_info->pcidev = pcidev;
 	vga_info->BIOSImage = copy_of_bios;
 	vga_info->BIOSImageLen = bios_image_len;
@@ -549,22 +470,13 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
 	return true;
 }
 
-#ifdef CONFIG_DM_PCI
 int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **vga_infop)
-#else
-int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop)
-#endif
 {
 	BE_VGAInfo *VGAInfo;
-#ifdef CONFIG_DM_PCI
 	pci_dev_t bdf = dm_pci_get_bdf(pcidev);
 
 	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
 	       PCI_BUS(bdf), PCI_FUNC(bdf), PCI_DEV(bdf));
-#else
-	printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n",
-	       PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev));
-#endif
 	/*Initialise the x86 BIOS emulator*/
 	if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) {
 		printf("videoboot: Out of memory!\n");
@@ -582,15 +494,9 @@ void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void))
 	X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func);
 }
 
-#ifdef CONFIG_DM_PCI
 int biosemu_run(struct udevice *pcidev, uchar *bios_rom, int bios_len,
 		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
 		struct vbe_mode_info *mode_info)
-#else
-int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
-		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
-		struct vbe_mode_info *mode_info)
-#endif
 {
 	/*Post all the display controller BIOS'es*/
 	if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info,
@@ -623,12 +529,8 @@ REMARKS:
 Boots the PCI/AGP video card on the bus using the Video ROM BIOS image
 and the X86 BIOS emulator module.
 ****************************************************************************/
-#ifdef CONFIG_DM_PCI
 int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo,
 		      int clean_up)
-#else
-int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up)
-#endif
 {
 	BE_VGAInfo *VGAInfo;
 	int ret;
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
index 77c7f94bc63..9596a1fdd3e 100644
--- a/drivers/bios_emulator/bios.c
+++ b/drivers/bios_emulator/bios.c
@@ -185,21 +185,12 @@ static void X86API int1A(int unused)
 	case 0xB103:		/* Find PCI class code */
 		M.x86.R_AH = DEVICE_NOT_FOUND;
 #ifdef __KERNEL__
-#ifdef CONFIG_DM_PCI
 		dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG,
 				    &interface);
 		dm_pci_read_config8(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE,
 				    &subclass);
 		dm_pci_read_config8(_BE_env.vgaInfo.pcidev,
 				    PCI_CLASS_DEVICE + 1, &baseclass);
-#else
-		pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_PROG,
-				     &interface);
-		pci_read_config_byte(_BE_env.vgaInfo.pcidev, PCI_CLASS_DEVICE,
-				     &subclass);
-		pci_read_config_byte(_BE_env.vgaInfo.pcidev,
-				     PCI_CLASS_DEVICE + 1, &baseclass);
-#endif
 		if (M.x86.R_CL == interface && M.x86.R_CH == subclass
 		    && (u8) (M.x86.R_ECX >> 16) == baseclass) {
 #else
@@ -218,13 +209,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_read_config8(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
 					    &M.x86.R_CL);
-# else
-			pci_read_config_byte(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
-					     &M.x86.R_CL);
-# endif
 #else
 			M.x86.R_CL =
 			    (u8) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_BYTE,
@@ -238,13 +224,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_read_config16(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
 					     &M.x86.R_CX);
-# else
-			pci_read_config_word(_BE_env.vgaInfo.pcidev, M.x86.R_DI,
-					     &M.x86.R_CX);
-# endif
 #else
 			M.x86.R_CX =
 			    (u16) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_WORD,
@@ -258,13 +239,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_read_config32(_BE_env.vgaInfo.pcidev,
 					     M.x86.R_DI, &M.x86.R_ECX);
-# else
-			pci_read_config_dword(_BE_env.vgaInfo.pcidev,
-					      M.x86.R_DI, &M.x86.R_ECX);
-# endif
 #else
 			M.x86.R_ECX =
 			    (u32) PCI_accessReg(M.x86.R_DI, 0, PCI_READ_DWORD,
@@ -278,13 +254,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_write_config8(_BE_env.vgaInfo.pcidev,
 					     M.x86.R_DI, M.x86.R_CL);
-# else
-			pci_write_config_byte(_BE_env.vgaInfo.pcidev,
-					      M.x86.R_DI, M.x86.R_CL);
-# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_CL, PCI_WRITE_BYTE,
 				      _BE_env.vgaInfo.pciInfo);
@@ -297,13 +268,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_write_config32(_BE_env.vgaInfo.pcidev,
 					      M.x86.R_DI, M.x86.R_CX);
-# else
-			pci_write_config_word(_BE_env.vgaInfo.pcidev,
-					      M.x86.R_DI, M.x86.R_CX);
-# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_CX, PCI_WRITE_WORD,
 				      _BE_env.vgaInfo.pciInfo);
@@ -316,13 +282,8 @@ static void X86API int1A(int unused)
 		if (M.x86.R_BX == pciSlot) {
 			M.x86.R_AH = SUCCESSFUL;
 #ifdef __KERNEL__
-# ifdef CONFIG_DM_PCI
 			dm_pci_write_config32(_BE_env.vgaInfo.pcidev,
 					      M.x86.R_DI, M.x86.R_ECX);
-# else
-			pci_write_config_dword(_BE_env.vgaInfo.pcidev,
-					       M.x86.R_DI, M.x86.R_ECX);
-# endif
 #else
 			PCI_accessReg(M.x86.R_DI, M.x86.R_ECX, PCI_WRITE_DWORD,
 				      _BE_env.vgaInfo.pciInfo);
diff --git a/include/bios_emul.h b/include/bios_emul.h
index 158e0f223d8..72410dc7948 100644
--- a/include/bios_emul.h
+++ b/include/bios_emul.h
@@ -30,11 +30,7 @@ typedef struct {
 	int bus;
 	u32 VendorID;
 	u32 DeviceID;
-#ifdef CONFIG_DM_PCI
 	struct udevice *pcidev;
-#else
-	pci_dev_t pcidev;
-#endif
 	void *BIOSImage;
 	u32 BIOSImageLen;
 	u8 LowMem[1536];
@@ -42,12 +38,8 @@ typedef struct {
 
 struct vbe_mode_info;
 
-#ifdef CONFIG_DM_PCI
 int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo,
 		      int clean_up);
-#else
-int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up);
-#endif
 
 /* Run a BIOS ROM natively (only supported on x86 machines) */
 void bios_run_on_x86(struct udevice *dev, unsigned long addr, int vesa_mode,
@@ -65,18 +57,10 @@ void bios_set_interrupt_handler(int intnum, int (*int_handler_func)(void));
 
 void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void));
 
-#ifdef CONFIG_DM_PCI
 int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **pVGAInfo);
 
 int biosemu_run(struct udevice *dev, uchar *bios_rom, int bios_len,
 		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
 		struct vbe_mode_info *mode_info);
-#else
-int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo);
-
-int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len,
-		BE_VGAInfo *vga_info, int clean_up, int vesa_mode,
-		struct vbe_mode_info *mode_info);
-#endif
 
 #endif
-- 
2.32.0.432.gabb21c7263-goog



More information about the U-Boot mailing list