[PATCH u-boot-mvebu 18/31] arm: mvebu: Fix return_to_bootrom()

Marek Behún marek.behun at nic.cz
Thu Jul 8 19:30:19 CEST 2021


From: Pali Rohár <pali at kernel.org>

Register r0 should be set to return value 0x0 - NO_ERR.

Set r0 with return value after all registers are restored from the
stack, so that the return value is always correct.

Signed-off-by: Pali Rohár <pali at kernel.org>
Fixes: 944c7a317675 ("arm: mvebu: Add option to use UART xmodem protocol via kwboot")
Reviewed-by: Marek Behún <marek.behun at nic.cz>
---
 arch/arm/mach-mvebu/lowlevel_spl.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/lowlevel_spl.S b/arch/arm/mach-mvebu/lowlevel_spl.S
index 8718d7a43e..dde77b7652 100644
--- a/arch/arm/mach-mvebu/lowlevel_spl.S
+++ b/arch/arm/mach-mvebu/lowlevel_spl.S
@@ -13,8 +13,9 @@ ENDPROC(save_boot_params)
 ENTRY(return_to_bootrom)
 	ldr	r12, =CONFIG_SPL_BOOTROM_SAVE
 	ldr	sp, [r12]
+	ldmfd	sp!, {r0 - r12, lr}	/* @ restore registers from stack */
 	mov	r0, #0x0		/* @ return value: 0x0 NO_ERR */
-	ldmfd	sp!, {r0 - r12, pc}	/* @ restore regs and return */
+	bx	lr			/* @ return to bootrom */
 ENDPROC(return_to_bootrom)
 
 /*
-- 
2.31.1



More information about the U-Boot mailing list