[PATCH u-boot-mvebu v2 20/41] tools: kwbimage: Mark all BootROM structures __packed

Stefan Roese sr at denx.de
Wed Jul 21 11:38:14 CEST 2021


On 19.07.21 14:20, Marek Behún wrote:
> From: Pali Rohár <pali at kernel.org>
> 
> These structures must have specific size without padding, so mark them as
> packed via the de-facto standard macro __packed. Also replace PACKED
> macro.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>
> Reviewed-by: Marek Behún <marek.behun at nic.cz>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   tools/kwbimage.h | 30 ++++++++++++++++++------------
>   tools/kwboot.c   |  8 +-------
>   2 files changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/tools/kwbimage.h b/tools/kwbimage.h
> index 9f86da46e8..e063e3e41e 100644
> --- a/tools/kwbimage.h
> +++ b/tools/kwbimage.h
> @@ -11,6 +11,12 @@
>   #include <compiler.h>
>   #include <stdint.h>
>   
> +#ifdef __GNUC__
> +#define __packed __attribute((packed))
> +#else
> +#define __packed
> +#endif
> +
>   #define KWBIMAGE_MAX_CONFIG	((0x1dc - 0x20)/sizeof(struct reg_config))
>   #define MAX_TEMPBUF_LEN		32
>   
> @@ -46,12 +52,12 @@ struct main_hdr_v0 {
>   	uint16_t rsvd2;			/* 0x1C-0x1D */
>   	uint8_t  ext;			/* 0x1E      */
>   	uint8_t  checksum;		/* 0x1F      */
> -};
> +} __packed;
>   
>   struct ext_hdr_v0_reg {
>   	uint32_t raddr;
>   	uint32_t rdata;
> -};
> +} __packed;
>   
>   #define EXT_HDR_V0_REG_COUNT ((0x1dc - 0x20) / sizeof(struct ext_hdr_v0_reg))
>   
> @@ -61,12 +67,12 @@ struct ext_hdr_v0 {
>   	struct ext_hdr_v0_reg rcfg[EXT_HDR_V0_REG_COUNT];
>   	uint8_t               reserved2[7];
>   	uint8_t               checksum;
> -};
> +} __packed;
>   
>   struct kwb_header {
>   	struct main_hdr_v0	kwb_hdr;
>   	struct ext_hdr_v0	kwb_exthdr;
> -};
> +} __packed;
>   
>   /* Structure of the main header, version 1 (Armada 370/38x/XP) */
>   struct main_hdr_v1 {
> @@ -87,7 +93,7 @@ struct main_hdr_v1 {
>   	uint16_t reserved5;             /* 0x1C-0x1D */
>   	uint8_t  ext;                   /* 0x1E      */
>   	uint8_t  checksum;              /* 0x1F      */
> -};
> +} __packed;
>   
>   /*
>    * Main header options
> @@ -109,21 +115,21 @@ struct opt_hdr_v1 {
>   	uint8_t  headersz_msb;
>   	uint16_t headersz_lsb;
>   	char     data[0];
> -};
> +} __packed;
>   
>   /*
>    * Public Key data in DER format
>    */
>   struct pubkey_der_v1 {
>   	uint8_t key[524];
> -};
> +} __packed;
>   
>   /*
>    * Signature (RSA 2048)
>    */
>   struct sig_v1 {
>   	uint8_t sig[256];
> -};
> +} __packed;
>   
>   /*
>    * Structure of secure header (Armada 38x)
> @@ -146,7 +152,7 @@ struct secure_hdr_v1 {
>   	uint8_t  next;			/* 0x25E0 */
>   	uint8_t  reserved4;		/* 0x25E1 */
>   	uint16_t reserved5;		/* 0x25E2 - 0x25E3 */
> -};
> +} __packed;
>   
>   /*
>    * Structure of register set
> @@ -159,14 +165,14 @@ struct register_set_hdr_v1 {
>   		struct {
>   			uint32_t address;	/* 0x4+8*N - 0x7+8*N */
>   			uint32_t value;		/* 0x8+8*N - 0xB+8*N */
> -		} entry;
> +		} __packed entry;
>   		struct {
>   			uint8_t  next;		/* 0xC+8*N */
>   			uint8_t  delay;		/* 0xD+8*N */
>   			uint16_t reserved;	/* 0xE+8*N - 0xF+8*N */
> -		} last_entry;
> +		} __packed last_entry;
>   	} data[];
> -};
> +} __packed;
>   
>   /*
>    * Value 0 in register_set_hdr_v1 delay field is special.
> diff --git a/tools/kwboot.c b/tools/kwboot.c
> index 4be094c9c8..2683e5360c 100644
> --- a/tools/kwboot.c
> +++ b/tools/kwboot.c
> @@ -26,12 +26,6 @@
>   #include <sys/mman.h>
>   #include <sys/stat.h>
>   
> -#ifdef __GNUC__
> -#define PACKED __attribute((packed))
> -#else
> -#define PACKED
> -#endif
> -
>   /*
>    * Marvell BootROM UART Sensing
>    */
> @@ -68,7 +62,7 @@ struct kwboot_block {
>   	uint8_t _pnum;
>   	uint8_t data[128];
>   	uint8_t csum;
> -} PACKED;
> +} __packed;
>   
>   #define KWBOOT_BLK_RSP_TIMEO 1000 /* ms */
>   
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list