[PATCH v3 4/4] configs: Enable USB3 on Allwinner H6 boards

[Andre Przywara]

From: Samuel Holland <samuel at sholland.org>

Pine H64 and Orange Pi 3 both provide a USB3 type A port.
Enable it in U-Boot.

Signed-off-by: Samuel Holland <samuel at sholland.org>
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 configs/orangepi_3_defconfig | 5 +++++
 configs/pine_h64_defconfig   | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/configs/orangepi_3_defconfig b/configs/orangepi_3_defconfig
index c243a582001..ebecf49ebda 100644
--- a/configs/orangepi_3_defconfig
+++ b/configs/orangepi_3_defconfig
@@ -8,5 +8,10 @@ CONFIG_MMC0_CD_PIN="PF6"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_BLUETOOTH_DT_DEVICE_FIXUP="brcm,bcm4345c5"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index 4e621db0c03..1928509dd7b 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -12,5 +12,10 @@ CONFIG_SPL_SPI_SUNXI=y
 # CONFIG_PSCI_RESET is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SUN8I_EMAC=y
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
-- 
2.17.5