[PATCH] arm64: zynqmp: Print the secure boot status information in EL3
Igor Opaniuk
igor.opaniuk at gmail.com
Thu Jul 22 18:00:03 CEST 2021
Hi Jorge,
On Thu, Jul 22, 2021 at 2:19 PM Jorge Ramirez-Ortiz <jorge at foundries.io> wrote:
>
> Confirm the secure boot configuration on the console.
>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge at foundries.io>
> ---
> arch/arm/mach-zynqmp/include/mach/hardware.h | 3 ++-
> board/xilinx/zynqmp/zynqmp.c | 16 +++++++++++++++-
> 2 files changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-zynqmp/include/mach/hardware.h b/arch/arm/mach-zynqmp/include/mach/hardware.h
> index 3776499070..3d3ffa086e 100644
> --- a/arch/arm/mach-zynqmp/include/mach/hardware.h
> +++ b/arch/arm/mach-zynqmp/include/mach/hardware.h
> @@ -139,7 +139,8 @@ struct apu_regs {
> #define ZYNQMP_SILICON_VER_SHIFT 0
>
> struct csu_regs {
> - u32 reserved0[4];
> + u32 status;
> + u32 reserved0[3];
> u32 multi_boot;
> u32 reserved1[11];
> u32 idcode;
> diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> index 1748fec2e4..b7d11630d1 100644
> --- a/board/xilinx/zynqmp/zynqmp.c
> +++ b/board/xilinx/zynqmp/zynqmp.c
> @@ -355,6 +355,18 @@ static int multi_boot(void)
> return 0;
> }
>
> +static void secure_boot(void)
> +{
> + u32 status;
> +
> + status = readl(&csu_base->status);
> + if (status & (BIT(0) | BIT(1))) {
> + printf("Secure Boot:\t%s%s\n",
> + status & BIT(0) ? "authenticated" : "not authenticated",
> + status & BIT(1) ? ", encrypted" : ", not encrypted");
> + }
> +}
> +
> #define PS_SYSMON_ANALOG_BUS_VAL 0x3210
> #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914
>
> @@ -391,8 +403,10 @@ int board_init(void)
> fpga_add(fpga_xilinx, &zynqmppl);
> #endif
>
> - if (current_el() == 3)
> + if (current_el() == 3) {
> multi_boot();
> + secure_boot();
> + }
>
> return 0;
> }
> --
> 2.31.1
>
Reviewed-by: Igor Opaniuk <igor.opaniuk at foundries.io>
--
Best regards - Freundliche Grüsse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
More information about the U-Boot
mailing list