[PATCH v2 1/3] imx8: Drop raw image support

[Simon Glass]

The CONFIG_SPL_RAW_IMAGE_SUPPORT option requires that binman provides an
offset for the image (see spl_set_header_raw_uboot()), if binman is used.
These boards use FIT to store U-Boot, so raw image support is not used.

Drop this option to avoid errors once binman starts checking this.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2:
- Add a new patch to drop raw image support for some imx8 boards

 configs/imx8mm-cl-iot-gate_defconfig | 1 +
 configs/imx8mm_evk_defconfig         | 1 +
 configs/imx8mn_ddr4_evk_defconfig    | 1 +
 configs/imx8mp_evk_defconfig         | 1 +
 configs/imx8mq_cm_defconfig          | 1 +
 configs/kontron_sl28_defconfig       | 1 +
 configs/phycore-imx8mp_defconfig     | 1 +
 7 files changed, 7 insertions(+)

diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig
index f46f45bda91..a1ded18f7e8 100644
--- a/configs/imx8mm-cl-iot-gate_defconfig
+++ b/configs/imx8mm-cl-iot-gate_defconfig
@@ -30,6 +30,7 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/compulab/imx8mm-cl-iot-gate/imximage-8mm-lpddr4.cfg"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig
index a06c6f9794a..9dc0be6b09e 100644
--- a/configs/imx8mm_evk_defconfig
+++ b/configs/imx8mm_evk_defconfig
@@ -27,6 +27,7 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8mm_evk/imximage-8mm-lpddr4.cfg"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_POWER_SUPPORT=y
diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig
index 205757da229..a96f729bde9 100644
--- a/configs/imx8mn_ddr4_evk_defconfig
+++ b/configs/imx8mn_ddr4_evk_defconfig
@@ -30,6 +30,7 @@ CONFIG_DEFAULT_FDT_FILE="imx8mn-ddr4-evk.dtb"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index d0f390ed776..df4463ca2b6 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -31,6 +31,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig
index e11122e645f..72d9ec8b258 100644
--- a/configs/imx8mq_cm_defconfig
+++ b/configs/imx8mq_cm_defconfig
@@ -25,6 +25,7 @@ CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ronetix/imx8mq-cm/imximage-8mq-lpddr4.cfg"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SYS_PROMPT="u-boot=> "
diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 29a45ec54bc..3868d7c39b0 100644
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -31,6 +31,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_PCI_INIT_R=y
 CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 32d538c8bbb..d63cba70108 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -27,6 +27,7 @@ CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_I2C_SUPPORT=y
-- 
2.32.0.432.gabb21c7263-goog