[PATCH v3 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)

[sbabic at denx.de]

> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> This adds support for i.MX6UL/ULL-based evaluation kits with SoMs by
> Kontron Electronics GmbH.
> Currently there are the following SoM flavors (SoM-Line):
>   * N6310: SOM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
>   * N6311: SOM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND
>   * N6411: SOM with i.MX6ULL, 512MB RAM, 512MB SPI NAND
> And the according evaluation boards (Board-Line):
>   * N6310-S: Baseboard with SOM N6310, eMMC, display (optional), ...
>   * N6311-S: Baseboard with SOM N6311, eMMC, display (optional), ...
>   * N6411-S: Baseboard with SOM N6411, eMMC, display (optional), ...
> Currently U-Boot describes i.MX6UL and i.MX6ULL through separate config
> options at compile-time. Though the differences are so minor, that for
> the scope of these SoMs we just use a single defconfig that is compatible
> with both SoCs.
> Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
> Reviewed-by: Stefano Babic <sbabic at denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================