[PATCH v3 7/7] vpl: Add Kconfig options for VPL
Simon Glass
sjg at chromium.org
Mon Jul 12 04:19:19 CEST 2021
Add VPL versions of commonly used Kconfig options.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
(no changes since v1)
Kconfig | 10 +++
arch/sandbox/Kconfig | 8 ++
common/Kconfig | 67 ++++++++++++++
common/spl/Kconfig | 189 +++++++++++++++++++++++++++++++++++++++
drivers/clk/Kconfig | 10 +++
drivers/core/Makefile | 2 +-
drivers/gpio/Kconfig | 11 +++
drivers/i2c/Kconfig | 11 +++
drivers/misc/Kconfig | 19 ++++
drivers/pinctrl/Kconfig | 18 +++-
drivers/rtc/Kconfig | 9 ++
drivers/serial/Kconfig | 20 +++++
drivers/sysreset/Kconfig | 10 +++
drivers/timer/Kconfig | 10 +++
lib/Kconfig | 62 +++++++++++++
15 files changed, 453 insertions(+), 3 deletions(-)
diff --git a/Kconfig b/Kconfig
index f8c1a77bedb..8cd8c59d045 100644
--- a/Kconfig
+++ b/Kconfig
@@ -264,6 +264,16 @@ config TPL_SYS_MALLOC_F_LEN
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
+config VPL_SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool in VPL before relocation"
+ depends on SYS_MALLOC_F && VPL
+ default SYS_MALLOC_F_LEN
+ help
+ Before relocation, memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index f83282d9d56..e504b08b951 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -29,6 +29,14 @@ config SANDBOX_SPL
bool "Enable SPL for sandbox"
select SUPPORT_SPL
+config SANDBOX_TPL
+ bool "Enable TPL for sandbox"
+ select SUPPORT_TPL
+
+config SANDBOX_VPL
+ bool "Enable VPL for sandbox"
+ select SUPPORT_VPL
+
config SYS_CONFIG_NAME
default "sandbox_spl" if SANDBOX_SPL
default "sandbox" if !SANDBOX_SPL
diff --git a/common/Kconfig b/common/Kconfig
index 26496f9a2e7..2a7f08af1dc 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -81,6 +81,15 @@ config TPL_LOGLEVEL
int
default LOGLEVEL
+config VPL_LOGLEVEL
+ int "loglevel for VPL"
+ default LOGLEVEL
+ help
+ All Messages with a loglevel smaller than the console loglevel will
+ be compiled in to VPL. See LOGLEVEL for a list of available log
+ levels. Setting this to a value above 4 may increase the code size
+ significantly.
+
config SILENT_CONSOLE
bool "Support a silent console"
help
@@ -254,6 +263,15 @@ config LOG
if LOG
+config VPL_LOG
+ bool "Enable logging support in VPL"
+ depends on LOG
+ help
+ This enables support for logging of status and debug messages. These
+ can be displayed on the console, recorded in a memory buffer, or
+ discarded if not needed. Logging supports various categories and
+ levels of severity.
+
config LOG_MAX_LEVEL
int "Maximum log level to record"
default 6
@@ -415,6 +433,47 @@ config TPL_LOG_CONSOLE
endif
+config VPL_LOG
+ bool "Enable logging support in VPL"
+ depends on LOG
+ help
+ This enables support for logging of status and debug messages. These
+ can be displayed on the console, recorded in a memory buffer, or
+ discarded if not needed. Logging supports various categories and
+ levels of severity.
+
+if VPL_LOG
+
+config VPL_LOG_MAX_LEVEL
+ int "Maximum log level to record in VPL"
+ default 3
+ help
+ This selects the maximum log level that will be recorded. Any value
+ higher than this will be ignored. If possible log statements below
+ this level will be discarded at build time. Levels:
+
+ 0 - emergency
+ 1 - alert
+ 2 - critical
+ 3 - error
+ 4 - warning
+ 5 - note
+ 6 - info
+ 7 - debug
+ 8 - debug content
+ 9 - debug hardware I/O
+
+config VPL_LOG_CONSOLE
+ bool "Allow log output to the console in VPL"
+ default y
+ help
+ Enables a log driver which writes log records to the console.
+ Generally the console is the serial port or LCD display. Only the
+ log message is shown - other details like level, category, file and
+ line number are omitted.
+
+endif
+
config LOG_ERROR_RETURN
bool "Log all functions which return an error"
help
@@ -711,6 +770,14 @@ config TPL_BLOBLIST
This enables a bloblist in TPL. The bloblist is set up in TPL and
passed to SPL and U-Boot proper.
+config VPL_BLOBLIST
+ bool "Support for a bloblist in VPL"
+ depends on BLOBLIST
+ default y if TPL_BLOBLIST
+ help
+ This enables a bloblist in VPL. The bloblist is set up in VPL and
+ passed to SPL and U-Boot proper.
+
config BLOBLIST_SIZE
hex "Size of bloblist"
depends on BLOBLIST
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 0443197cd55..106296d81d6 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -167,6 +167,13 @@ config SPL_BOARD_INIT
spl_board_init() from board_init_r(). This function should be
provided by the board.
+config VPL_BOARD_INIT
+ bool "Call board-specific initialization in VPL"
+ help
+ If this option is enabled, U-Boot will call the function
+ spl_board_init() from board_init_r(). This function should be
+ provided by the board.
+
config SPL_BOOTROM_SUPPORT
bool "Support returning to the BOOTROM"
help
@@ -310,6 +317,15 @@ config TPL_BANNER_PRINT
info. Disabling this option could be useful to reduce TPL boot time
(e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
+config VPL_BANNER_PRINT
+ bool "Enable output of the VPL banner 'U-Boot VPL ...'"
+ depends on VPL
+ default y
+ help
+ If this option is enabled, VPL will print the banner with version
+ info. Disabling this option could be useful to reduce VPL boot time
+ (e.g. approx. 6 ms faster, when output on i.MX6 with 115200 baud).
+
config SPL_EARLY_BSS
depends on ARM && !ARM64
bool "Allows initializing BSS early before entering board_init_f"
@@ -819,6 +835,27 @@ config SPL_DM_SPI_FLASH
Enable support for SPI DM flash drivers in SPL.
endif
+
+if TPL
+
+config VPL_CACHE
+ depends on CACHE
+ bool "Support cache drivers in SPL"
+ help
+ Enable support for cache drivers in SPL.
+
+config VPL_DM_SPI
+ bool "Support SPI DM drivers in SPL"
+ help
+ Enable support for SPI DM drivers in SPL.
+
+config VPL_DM_SPI_FLASH
+ bool "Support SPI DM FLASH drivers in SPL"
+ help
+ Enable support for SPI DM flash drivers in SPL.
+
+endif
+
if SPL_UBI
config SPL_UBI_LOAD_BY_VOLNAME
bool "Support loading volumes by name"
@@ -1636,6 +1673,158 @@ config TPL_YMODEM_SUPPORT
endif # TPL
+config VPL
+ bool
+ depends on SUPPORT_SPL
+ prompt "Enable VPL"
+ help
+ If you want to build VPL as well as the normal image, TPL and SPL,
+ say Y.
+
+if VPL
+
+config VPL_FRAMEWORK
+ bool "Support VPL based upon the common SPL framework"
+ default y
+ help
+ Enable the SPL framework under common/spl/ for VPL builds.
+ This framework supports MMC, NAND and YMODEM and other methods
+ loading of U-Boot's next stage. If unsure, say Y.
+
+config VPL_HANDOFF
+ bool "Pass hand-off information from VPL to SPL"
+ depends on HANDOFF && VPL_BLOBLIST
+ default y
+ help
+ This option enables VPL to write handoff information. This can be
+ used to pass information like the size of SDRAM from VPL to SPL. Also
+ VPL can receive information from TPL in the same place if that is
+ enabled.
+
+config VPL_LIBCOMMON_SUPPORT
+ bool "Support common libraries"
+ default y if SPL_LIBCOMMON_SUPPORT
+ help
+ Enable support for common U-Boot libraries within VPL. See
+ SPL_LIBCOMMON_SUPPORT for details.
+
+config VPL_LIBGENERIC_SUPPORT
+ bool "Support generic libraries"
+ default y if SPL_LIBGENERIC_SUPPORT
+ help
+ Enable support for generic U-Boot libraries within VPL. These
+ libraries include generic code to deal with device tree, hashing,
+ printf(), compression and the like. This option is enabled on many
+ boards. Enable this option to build the code in lib/ as part of an
+ SPL build.
+
+config VPL_DRIVERS_MISC_SUPPORT
+ bool "Support misc drivers"
+ default y if TPL_DRIVERS_MISC_SUPPORT
+ help
+ Enable miscellaneous drivers in VPL. These drivers perform various
+ tasks that don't fall nicely into other categories, Enable this
+ option to build the drivers in drivers/misc as part of an VPL
+ build, for those that support building in VPL (not all drivers do).
+
+config VPL_ENV_SUPPORT
+ bool "Support an environment"
+ help
+ Enable environment support in VPL. The U-Boot environment provides
+ a number of settings (essentially name/value pairs) which can
+ control many aspects of U-Boot's operation. Enabling this option will
+ make env_get() and env_set() available in VSPL.
+
+config VPL_GPIO_SUPPORT
+ bool "Support GPIO in VPL"
+ default y if SPL_GPIO_SUPPORT
+ help
+ Enable support for GPIOs (General-purpose Input/Output) in VPL.
+ GPIOs allow U-Boot to read the state of an input line (high or
+ low) and set the state of an output line. This can be used to
+ drive LEDs, control power to various system parts and read user
+ input. GPIOs can be useful in TPL to enable a 'sign-of-life' LED,
+ for example. Enable this option to build the drivers in
+ drivers/gpio as part of an TPL build.
+
+config VPL_HASH_SUPPORT
+ bool "Support hashing drivers in VPL"
+ depends on VPL
+ select SHA1
+ select SHA256
+ help
+ Enable hashing drivers in SPL. These drivers can be used to
+ accelerate secure boot processing in secure applications. Enable
+ this option to build system-specific drivers for hash acceleration
+ as part of an SPL build.
+
+config VPL_I2C_SUPPORT
+ bool "Support I2C in VPL"
+ default y if SPL_I2C_SUPPORT
+ help
+ Enable support for the I2C bus in TPL. Vee SPL_I2C_SUPPORT for
+ details.
+
+config VPL_PCH_SUPPORT
+ bool "Support PCH drivers"
+ default y if TPL_PCH_SUPPORT
+ help
+ Enable support for PCH (Platform Controller Hub) devices in VPL.
+ These are used to set up GPIOs and the SPI peripheral early in
+ boot. This enables the drivers in drivers/pch as part of a VPL
+ build.
+
+config VPL_PCI
+ bool "Support PCI drivers"
+ default y if SPL_PCI
+ help
+ Enable support for PCI in VPL. For platforms that need PCI to boot,
+ or must perform some init using PCI in VPL, this provides the
+ necessary driver support. This enables the drivers in drivers/pci
+ as part of a VPL build.
+
+config VPL_RTC_SUPPORT
+ bool "Support RTC drivers"
+ help
+ Enable RTC (Real-time Clock) support in VPL. This includes support
+ for reading and setting the time. Some RTC devices also have some
+ non-volatile (battery-backed) memory which is accessible if
+ needed. This enables the drivers in drivers/rtc as part of an VPL
+ build.
+
+config VPL_SERIAL_SUPPORT
+ bool "Support serial"
+ default y if SPL_SERIAL_SUPPORT
+ select VPL_PRINTF
+ select VPL_STRTO
+ help
+ Enable support for serial in VPL. See SPL_SERIAL_SUPPORT for
+ details.
+
+config VPL_SPI_SUPPORT
+ bool "Support SPI drivers"
+ help
+ Enable support for using SPI in VPL. See SPL_SPI_SUPPORT for
+ details.
+
+config VPL_SPI_FLASH_SUPPORT
+ bool "Support SPI flash drivers"
+ help
+ Enable support for using SPI flash in VPL, and loading U-Boot from
+ SPI flash. SPI flash (Serial Peripheral Bus flash) is named after
+ the SPI bus that is used to connect it to a system. It is a simple
+ but fast bidirectional 4-wire bus (clock, chip select and two data
+ lines). This enables the drivers in drivers/mtd/spi as part of an
+ VPL build. This normally requires VPL_SPI_SUPPORT.
+
+config VPL_TEXT_BASE
+ hex "VPL Text Base"
+ default 0x0
+ help
+ The address in memory that VPL will be running from.
+
+endif
+
config SPL_AT91_MCK_BYPASS
bool "Use external clock signal as a source of main clock for AT91 platforms"
depends on ARCH_AT91
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index e07c6dd78a6..4b0bed66bfb 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -30,6 +30,16 @@ config TPL_CLK
setting up clocks within TPL, and allows the same drivers to be
used as U-Boot proper.
+config VPL_CLK
+ bool "Enable clock support in VPL"
+ depends on CLK && VPL_DM
+ help
+ The clock subsystem adds a small amount of overhead to the image.
+ If this is acceptable and you have a need to use clock drivers in
+ SPL, enable this option. It might provide a cleaner interface to
+ setting up clocks within TPL, and allows the same drivers to be
+ used as U-Boot proper.
+
config CLK_BCM6345
bool "Clock controller driver for BCM6345"
depends on CLK && ARCH_BMIPS
diff --git a/drivers/core/Makefile b/drivers/core/Makefile
index 5edd4e41357..07a0886383f 100644
--- a/drivers/core/Makefile
+++ b/drivers/core/Makefile
@@ -5,7 +5,7 @@
obj-y += device.o fdtaddr.o lists.o root.o uclass.o util.o
obj-$(CONFIG_$(SPL_TPL_)ACPIGEN) += acpi.o
obj-$(CONFIG_DEVRES) += devres.o
-obj-$(CONFIG_$(SPL_)DM_DEVICE_REMOVE) += device-remove.o
+obj-$(CONFIG_$(SPL_TPL_)DM_DEVICE_REMOVE) += device-remove.o
obj-$(CONFIG_$(SPL_)SIMPLE_BUS) += simple-bus.o
obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_DM) += dump.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index de4dc51d4b4..36a0074f5b9 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -36,6 +36,17 @@ config TPL_DM_GPIO
particular GPIOs that they provide. The uclass interface
is defined in include/asm-generic/gpio.h.
+config VPL_DM_GPIO
+ bool "Enable Driver Model for GPIO drivers in VPL"
+ depends on DM_GPIO && VPL_DM && VPL_GPIO
+ default y
+ help
+ Enable driver model for GPIO access in VPL. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
+
config GPIO_HOG
bool "Enable GPIO hog support"
depends on DM_GPIO
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 35d6e2c8ec5..31f9cb44769 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -25,6 +25,17 @@ config SPL_DM_I2C
device (bus child) info is kept as parent platdata. The interface
is defined in include/i2c.h.
+config VPL_DM_I2C
+ bool "Enable Driver Model for I2C drivers in VPL"
+ depends on VPL_DM && DM_I2C
+ default y
+ help
+ Enable driver model for I2C. The I2C uclass interface: probe, read,
+ write and speed, is implemented with the bus drivers operations,
+ which provide methods for bus setting and data transfer. Each chip
+ device (bus child) info is kept as parent platdata. The interface
+ is defined in include/i2c.h.
+
config I2C_CROS_EC_TUNNEL
tristate "Chrome OS EC tunnel I2C bus"
depends on CROS_EC
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 997b7132211..12f419771a2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -122,6 +122,16 @@ config TPL_CROS_EC
control access to the battery and main PMIC depending on the
device. You can use the 'crosec' command to access it.
+config VPL_CROS_EC
+ bool "Enable Chrome OS EC in VPL"
+ depends on VPL
+ help
+ Enable access to the Chrome OS EC in VPL. This is a separate
+ microcontroller typically available on a SPI bus on Chromebooks. It
+ provides access to the keyboard, some internal storage and may
+ control access to the battery and main PMIC depending on the
+ device. You can use the 'crosec' command to access it.
+
config CROS_EC_I2C
bool "Enable Chrome OS EC I2C driver"
depends on CROS_EC
@@ -185,6 +195,15 @@ config TPL_CROS_EC_SANDBOX
EC flash read/write/erase support and a few other things. It is
enough to perform a Chrome OS verified boot on sandbox.
+config VPL_CROS_EC_SANDBOX
+ bool "Enable Chrome OS EC sandbox driver in VPL"
+ depends on VPL_CROS_EC && SANDBOX
+ help
+ Enable a sandbox emulation of the Chrome OS EC in VPL. This supports
+ keyboard (use the -l flag to enable the LCD), verified boot context,
+ EC flash read/write/erase support and a few other things. It is
+ enough to perform a Chrome OS verified boot on sandbox.
+
config CROS_EC_SPI
bool "Enable Chrome OS EC SPI driver"
depends on CROS_EC
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 77fb8511144..d967a82f726 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -89,20 +89,34 @@ config TPL_PINCTRL
This option is an TPL variant of the PINCTRL option.
See the help of PINCTRL for details.
+config VPL_PINCTRL
+ bool "Support pin controllers in VPL"
+ depends on VPL && VPL_DM
+ help
+ This option is an VPL variant of the PINCTRL option.
+ See the help of PINCTRL for details.
+
config SPL_PINCTRL_FULL
bool "Support full pin controllers in SPL"
depends on SPL_PINCTRL && SPL_OF_CONTROL
default n if TARGET_STM32F746_DISCO
default y
help
- This option is an SPL-variant of the PINCTRL_FULL option.
+ This option is an SPL variant of the PINCTRL_FULL option.
See the help of PINCTRL_FULL for details.
config TPL_PINCTRL_FULL
bool "Support full pin controllers in TPL"
depends on TPL_PINCTRL && TPL_OF_CONTROL
help
- This option is an TPL-variant of the PINCTRL_FULL option.
+ This option is a TPL variant of the PINCTRL_FULL option.
+ See the help of PINCTRL_FULL for details.
+
+config VPL_PINCTRL_FULL
+ bool "Support full pin controllers in VPL"
+ depends on VPL_PINCTRL && VPL_OF_CONTROL
+ help
+ This option is a VPL variant of the PINCTRL_FULL option.
See the help of PINCTRL_FULL for details.
config SPL_PINCTRL_GENERIC
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cbdfddb80f6..3de6d3fb4d8 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -32,6 +32,15 @@ config TPL_DM_RTC
drivers to perform the actual functions. See rtc.h for a
description of the API.
+config VPL_DM_RTC
+ bool "Enable Driver Model for RTC drivers in VPL"
+ depends on VPL_DM
+ help
+ Enable drver model for real-time-clock drivers. The RTC uclass
+ then provides the rtc_get()/rtc_set() interface, delegating to
+ drivers to perform the actual functions. See rtc.h for a
+ description of the API.
+
config RTC_ENABLE_32KHZ_OUTPUT
bool "Enable RTC 32Khz output"
help
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 961e3fb0314..a8fdffe2ccf 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -63,6 +63,16 @@ config TPL_SERIAL_PRESENT
This option enables the full UART in TPL, so if is it disabled,
the full UART driver will be omitted, thus saving space.
+config VPL_SERIAL_PRESENT
+ bool "Provide a serial driver in VPL"
+ depends on DM_SERIAL && VPL
+ default y
+ help
+ In very space-constrained devices even the full UART driver is too
+ large. In this case the debug UART can still be used in some cases.
+ This option enables the full UART in TPL, so if is it disabled,
+ the full UART driver will be omitted, thus saving space.
+
# Logic to allow us to use the imply keyword to set what the default port
# should be. The default is otherwise 1.
config CONS_INDEX_0
@@ -172,6 +182,16 @@ config TPL_DM_SERIAL
implements serial_putc() etc. The uclass interface is
defined in include/serial.h.
+config VPL_DM_SERIAL
+ bool "Enable Driver Model for serial drivers in VPL"
+ depends on DM_SERIAL
+ default y if VPL && DM_SERIAL
+ help
+ Enable driver model for serial in VPL. This replaces
+ drivers/serial/serial.c with the serial uclass, which
+ implements serial_putc() etc. The uclass interface is
+ defined in include/serial.h.
+
config DEBUG_UART
bool "Enable an early debug UART for debugging"
help
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index ac77ffbc8be..fec6fed6c31 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -31,6 +31,16 @@ config TPL_SYSRESET
to effect a reset. The uclass will try all available drivers when
reset_walk() is called.
+config VPL_SYSRESET
+ bool "Enable support for system reset drivers in VPL mode"
+ depends on SYSRESET && VPL_DM
+ default y if TPL_SYSRESET
+ help
+ Enable system reset drivers which can be used to reset the CPU or
+ board. Each driver can provide a reset method which will be called
+ to effect a reset. The uclass will try all available drivers when
+ reset_walk() is called.
+
if SYSRESET
config SYSRESET_CMD_RESET
diff --git a/drivers/timer/Kconfig b/drivers/timer/Kconfig
index ee81dfa7768..ac601f00ecf 100644
--- a/drivers/timer/Kconfig
+++ b/drivers/timer/Kconfig
@@ -27,6 +27,16 @@ config TPL_TIMER
function. This enables the drivers in drivers/timer as part of an
TPL build.
+config VPL_TIMER
+ bool "Enable driver model for timer drivers in VPL"
+ depends on TIMER && VPL
+ default y if TPL_TIMER
+ help
+ Enable support for timer drivers in VPL. These can be used to get
+ a timer value when in VPL, or perhaps for implementing a delay
+ function. This enables the drivers in drivers/timer as part of an
+ TPL build.
+
config TIMER_EARLY
bool "Allow timer to be used early in U-Boot"
depends on TIMER
diff --git a/lib/Kconfig b/lib/Kconfig
index ad0cd52edd8..1706eef91c5 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -72,6 +72,11 @@ config TPL_PRINTF
select TPL_SPRINTF
select TPL_STRTO if !TPL_USE_TINY_PRINTF
+config VPL_PRINTF
+ bool
+ select VPL_SPRINTF
+ select VPL_STRTO if !VPL_USE_TINY_PRINTF
+
config SPRINTF
bool
default y
@@ -82,6 +87,9 @@ config SPL_SPRINTF
config TPL_SPRINTF
bool
+config VPL_SPRINTF
+ bool
+
config SSCANF
bool
default n
@@ -96,6 +104,9 @@ config SPL_STRTO
config TPL_STRTO
bool
+config VPL_STRTO
+ bool
+
config IMAGE_SPARSE
bool
@@ -148,6 +159,17 @@ config TPL_USE_TINY_PRINTF
The supported format specifiers are %c, %s, %u/%d and %x.
+config VPL_USE_TINY_PRINTF
+ bool "Enable tiny printf() version for VPL"
+ depends on VPL
+ help
+ This option enables a tiny, stripped down printf version.
+ This should only be used in space limited environments,
+ like SPL versions with hard memory limits. This version
+ reduces the code size by about 2.5KiB on armv7.
+
+ The supported format specifiers are %c, %s, %u/%d and %x.
+
config PANIC_HANG
bool "Do not reset the system on fatal error"
help
@@ -331,6 +353,17 @@ config TPL_TPM
for the low-level TPM interface, but only one TPM is supported at
a time by the TPM library.
+config VPL_TPM
+ bool "Trusted Platform Module (TPM) Support in VPL"
+ depends on VPL_DM
+ help
+ This enables support for TPMs which can be used to provide security
+ features for your board. The TPM can be connected via LPC or I2C
+ and a sandbox TPM is provided for testing purposes. Use the 'tpm'
+ command to interactive the TPM. Driver model support is provided
+ for the low-level TPM interface, but only one TPM is supported at
+ a time by the TPM library.
+
endmenu
menu "Android Verified Boot"
@@ -518,6 +551,12 @@ config SPL_LZMA
help
This enables support for LZMA compression algorithm for SPL boot.
+config VPL_LZMA
+ bool "Enable LZMA decompression support for VPL build"
+ default y if LZMA
+ help
+ This enables support for LZMA compression algorithm for VPL boot.
+
config SPL_LZO
bool "Enable LZO decompression support in SPL"
help
@@ -598,6 +637,7 @@ config OF_LIBFDT_OVERLAY
config SPL_OF_LIBFDT
bool "Enable the FDT library for SPL"
+ depends on SPL_LIBGENERIC_SUPPORT
default y if SPL_OF_CONTROL
help
This enables the FDT library (libfdt). It provides functions for
@@ -619,6 +659,7 @@ config SPL_OF_LIBFDT_ASSUME_MASK
config TPL_OF_LIBFDT
bool "Enable the FDT library for TPL"
+ depends on TPL_LIBGENERIC_SUPPORT
default y if TPL_OF_CONTROL
help
This enables the FDT library (libfdt). It provides functions for
@@ -638,6 +679,27 @@ config TPL_OF_LIBFDT_ASSUME_MASK
0xff means all assumptions are made and any invalid data may cause
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+config VPL_OF_LIBFDT
+ bool "Enable the FDT library for VPL"
+ default y if VPL_OF_CONTROL && !VPL_OF_PLATDATA
+ help
+ This enables the FDT library (libfdt). It provides functions for
+ accessing binary device tree images in memory, such as adding and
+ removing nodes and properties, scanning through the tree and finding
+ particular compatible nodes. The library operates on a flattened
+ version of the device tree.
+
+config VPL_OF_LIBFDT_ASSUME_MASK
+ hex "Mask of conditions to assume for libfdt"
+ depends on VPL_OF_LIBFDT || FIT
+ default 0xff
+ help
+ Use this to change the assumptions made by libfdt in SPL about the
+ device tree it is working with. A value of 0 means that no assumptions
+ are made, and libfdt is able to deal with malicious data. A value of
+ 0xff means all assumptions are made and any invalid data may cause
+ unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
+
config FDT_FIXUP_PARTITIONS
bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
depends on OF_LIBFDT
--
2.32.0.93.g670b81a890-goog
More information about the U-Boot
mailing list