[PATCH] rockchip: rk3328: fix booting error for nanopi-r2s

jason416 jason416.gm at gmail.com
Tue Jul 6 17:06:30 CEST 2021


devices can not boot properly during SPL stage by
using microSD card which model is SDSQUNC-032G-ZN6MA.

U-Boot SPL 2021.04 (Jul 02 2021 - 19:50:12 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices

change dts and config to support booting from ultra
high speed microSD card on nanopi-r2s.

Signed-off-by: jason416 <jason416.gm at gmail.com>
---
 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 4 ++++
 arch/arm/dts/rk3328-nanopi-r2s.dts         | 2 +-
 configs/nanopi-r2s-rk3328_defconfig        | 4 ++++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
index 9e2ced1541..d5469748a2 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
@@ -33,6 +33,10 @@
 	u-boot,dm-spl;
 };
 
+&vcc_io_sdio {
+	u-boot,dm-spl;
+};
+
 &gmac2io {
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts b/arch/arm/dts/rk3328-nanopi-r2s.dts
index 5445c5cb3d..452e4764e6 100644
--- a/arch/arm/dts/rk3328-nanopi-r2s.dts
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
@@ -323,7 +323,7 @@
 	bus-width = <4>;
 	cap-sd-highspeed;
 	disable-wp;
-	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+	pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>, <&sdmmc0m1_gpio>;
 	pinctrl-names = "default";
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
diff --git a/configs/nanopi-r2s-rk3328_defconfig b/configs/nanopi-r2s-rk3328_defconfig
index 52996266a1..a7969bd7ab 100644
--- a/configs/nanopi-r2s-rk3328_defconfig
+++ b/configs/nanopi-r2s-rk3328_defconfig
@@ -56,6 +56,10 @@ CONFIG_FASTBOOT_BUF_ADDR=0x800800
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_SF_DEFAULT_SPEED=20000000
-- 
2.17.1



More information about the U-Boot mailing list