[PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi

[Tim Harvey]

On Sat, Jul 10, 2021 at 5:23 AM Heiko Schocher <hs at denx.de> wrote:
>
> Hello Tim,
>
> On 09.07.21 16:47, Tim Harvey wrote:
> > On Wed, Jul 7, 2021 at 5:58 AM Teresa Remmet <t.remmet at phytec.de> wrote:
> >>
> >> Factor out the common node settings for dm-spl and dm-pre-reloc
> >> and move them to imx8mp-u-boot.dtsi
> >>
> >> Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
> >> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> >> Reviewed-by: Heiko Schocher <hs at denx.de>
> >> ---
> >> Changes in v3:
> >> - Moved binman nodes to common imx8mp-u-boot.dtsi
> >> Changes in v2:
> >> - none
> >>
> >>  arch/arm/dts/imx8mp-evk-u-boot.dtsi           | 143 +----------------
> >>  .../imx8mp-phyboard-pollux-rdk-u-boot.dtsi    |  39 +----
> >>  arch/arm/dts/imx8mp-u-boot.dtsi               | 149 ++++++++++++++++++
> >>  3 files changed, 153 insertions(+), 178 deletions(-)
> >>  create mode 100644 arch/arm/dts/imx8mp-u-boot.dtsi
> >>
<snip>
> >>
> >
> > Teresa,
> >
> > I've noticed many of the imx8m boards migrating to using binman for
> > image packaging.
> >
> > Doesn't this change from having a single flash.bin encompasing the SPL
> > and U-Boot proper to having split files? I noticed that happened with
> > imx8mm_evk for example when it switched to binman.
>
> Yes, but you can easy generate there a single image again.
>
> > What are the benefits to using binman?
>
> Beside the pros from binmal in general, I see the benefit in special
> for imx8mp, that you can get all infos you need for signing the image
> from within the image. No need to save some log output from U-Boot
> build and parse this output ...
>

(+cc Simon)

Heiko,

And what are the pros from binman in general? I've read over
tools/binman/binman.rst so I'm assuming you mean what is described
there as benefits.

How do you get all the details needed for signing the image from binman?

If I make imx8mm_evk_defconfig which produces via binman flash.bin and
u-boot.itb I get the following:

$ ./tools/binman/binman ls -i flash.bin
binman: Cannot find FDT map in image
$ ./tools/binman/binman ls -i u-boot.itb
binman: Cannot find FDT map in image

I would very much like to understand how to use binman to get the
various offsets needed for signing an IMX image for use with HAB.

Thanks,

Tim