[PATCH v3 4/6] mmc: zynq_sdhci: Split set_tapdelay function to in and out
Ashok Reddy Soma
ashok.reddy.soma at xilinx.com
Fri Jul 9 13:53:42 CEST 2021
Split arasan_zynqmp_set_tapdelay() to handle input and output tapdelays
separately. This is required to handle zero values for ITAP and OTAP
values. If we dont split, we will have to remove the if() in the
function, which makes ITAP values to be overwritten when OTAP values are
called to set and vice-versa.
Restrict tap_delay value calculated to max allowed 8 bits for ITAP and 6
bits for OTAP for ZynqMP.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
---
(no changes since v1)
board/xilinx/zynqmp/tap_delays.c | 73 +++++++++++++++++---------------
drivers/mmc/zynq_sdhci.c | 10 ++++-
include/zynqmp_tap_delay.h | 7 +--
3 files changed, 50 insertions(+), 40 deletions(-)
diff --git a/board/xilinx/zynqmp/tap_delays.c b/board/xilinx/zynqmp/tap_delays.c
index 1cab25f00a..d16bbb8eff 100644
--- a/board/xilinx/zynqmp/tap_delays.c
+++ b/board/xilinx/zynqmp/tap_delays.c
@@ -50,48 +50,51 @@ void zynqmp_dll_reset(u8 deviceid)
zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0);
}
-void arasan_zynqmp_set_tapdelay(u8 deviceid, u32 itap_delay, u32 otap_delay)
+void arasan_zynqmp_set_in_tapdelay(u8 deviceid, u32 itap_delay)
{
if (deviceid == 0) {
- zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK,
- SD0_DLL_RST);
- /* Program ITAP */
- if (itap_delay) {
- zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK,
- SD0_ITAPCHGWIN);
- zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYENA_MASK,
- SD0_ITAPDLYENA);
- zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYSEL_MASK,
- itap_delay);
- zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK,
- 0x0);
- }
+ zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, SD0_DLL_RST);
- /* Program OTAP */
- if (otap_delay)
- zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK,
- otap_delay);
+ /* Program ITAP delay */
+ zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK,
+ SD0_ITAPCHGWIN);
+ zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYENA_MASK,
+ SD0_ITAPDLYENA);
+ zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPDLYSEL_MASK, itap_delay);
+ zynqmp_mmio_write(SD_ITAP_DLY, SD0_ITAPCHGWIN_MASK, 0x0);
zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, 0x0);
} else {
- zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK,
- SD1_DLL_RST);
- /* Program ITAP */
- if (itap_delay) {
- zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK,
- SD1_ITAPCHGWIN);
- zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYENA_MASK,
- SD1_ITAPDLYENA);
- zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYSEL_MASK,
- (itap_delay << 16));
- zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK,
- 0x0);
- }
+ zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, SD1_DLL_RST);
+
+ /* Program ITAP delay */
+ zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK,
+ SD1_ITAPCHGWIN);
+ zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYENA_MASK,
+ SD1_ITAPDLYENA);
+ zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPDLYSEL_MASK,
+ (itap_delay << 16));
+ zynqmp_mmio_write(SD_ITAP_DLY, SD1_ITAPCHGWIN_MASK, 0x0);
+
+ zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0);
+ }
+}
+
+void arasan_zynqmp_set_out_tapdelay(u8 deviceid, u32 otap_delay)
+{
+ if (deviceid == 0) {
+ zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, SD0_DLL_RST);
+
+ /* Program OTAP delay */
+ zynqmp_mmio_write(SD_OTAP_DLY, SD0_OTAPDLYSEL_MASK, otap_delay);
+
+ zynqmp_mmio_write(SD_DLL_CTRL, SD0_DLL_RST_MASK, 0x0);
+ } else {
+ zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, SD1_DLL_RST);
- /* Program OTAP */
- if (otap_delay)
- zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK,
- (otap_delay << 16));
+ /* Program OTAP delay */
+ zynqmp_mmio_write(SD_OTAP_DLY, SD1_OTAPDLYSEL_MASK,
+ (otap_delay << 16));
zynqmp_mmio_write(SD_DLL_CTRL, SD1_DLL_RST_MASK, 0x0);
}
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index bf638e9675..95d42ccef4 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -226,7 +226,10 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct sdhci_host *host,
tap_delay = (degrees * tap_max) / 360;
- arasan_zynqmp_set_tapdelay(priv->deviceid, 0, tap_delay);
+ /* Limit output tap_delay value to 6 bits */
+ tap_delay &= SDHCI_ARASAN_OTAPDLY_SEL_MASK;
+
+ arasan_zynqmp_set_out_tapdelay(priv->deviceid, tap_delay);
return 0;
}
@@ -279,7 +282,10 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
tap_delay = (degrees * tap_max) / 360;
- arasan_zynqmp_set_tapdelay(priv->deviceid, tap_delay, 0);
+ /* Limit input tap_delay value to 8 bits */
+ tap_delay &= SDHCI_ARASAN_ITAPDLY_SEL_MASK;
+
+ arasan_zynqmp_set_in_tapdelay(priv->deviceid, tap_delay);
return 0;
}
diff --git a/include/zynqmp_tap_delay.h b/include/zynqmp_tap_delay.h
index 7b713438f7..1c1e3e7dee 100644
--- a/include/zynqmp_tap_delay.h
+++ b/include/zynqmp_tap_delay.h
@@ -10,11 +10,12 @@
#ifdef CONFIG_ARCH_ZYNQMP
void zynqmp_dll_reset(u8 deviceid);
-void arasan_zynqmp_set_tapdelay(u8 device_id, u32 itap_delay, u32 otap_delay);
+void arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 itap_delay);
+void arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 otap_delay);
#else
inline void zynqmp_dll_reset(u8 deviceid) {}
-inline void arasan_zynqmp_set_tapdelay(u8 device_id, u32 itap_delay,
- u32 otap_delay) {}
+inline void arasan_zynqmp_set_in_tapdelay(u8 device_id, u32 itap_delay) {}
+inline void arasan_zynqmp_set_out_tapdelay(u8 device_id, u32 otap_delay) {}
#endif
#endif
--
2.17.1
More information about the U-Boot
mailing list