[PATCH] board: amlogic: vim3: fix phy-names property setup

[Artem Lapkin]

phy-names was improperly implemented resulting in an inoperable USB-OTG
port.

- phy-names = "usb2-phy0\0\0usb2-phy1\0";
+ phy-names = "usb2-phy0\0usb2-phy1";

Signed-off-by: Artem Lapkin <art at khadas.com>
---
 board/amlogic/vim3/vim3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index c8ebd676..6a67a39c 100644
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -109,8 +109,8 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
 		}
 
 		/* Update PHY names (mandatory to disable USB3.0) */
-		len = strlcpy(data, "usb2-phy0", 32) + 1;
-		len += strlcpy(&data[len], "usb2-phy1", 32 - len) + 1;
+		len = strlcpy(data, "usb2-phy0", 32);
+		len += strlcpy(&data[len], "usb2-phy1", 32 - len);
 		ret = fdt_setprop(blob, node, "phy-names", data, len);
 		if (ret < 0) {
 			printf("vim3: failed to update usb phy names property (%d)\n", ret);
-- 
2.25.1