Help wanted: Adding OpenSSL in FSL HAB

[Jojan]

 You need to enable configs , by running
make menuconfig     Library routines > Security support 
and enable the configs needed for the library.


    On Monday, July 19, 2021, 10:11:05 PM PDT, Daniel D <daniel.selvan at jasmin-infotech.com> wrote:  
 
 The architecture is arm (i.MX 6UL board) and I've successfully added HAB.

I want to include OpenSSL library into the U-Boot now. Can you comment on this?


Kind regards,


Daniel Selvan D.


--


P Please consider the environment before printing this email.

From: "Jojan" <jjvazha at yahoo.com>
To: "u-boot" <u-boot at lists.denx.de>, "Daniel D" <daniel.selvan at jasmin-infotech.com>
Sent: Monday, 19 July, 2021 23:40:00
Subject: Re: Help wanted: Adding OpenSSL in FSL HAB

 Which architecture ?There is a hab.c in ./arch/arm/mach-imx/hab.c
It is added based on the CONFIG_IMX_HAB. 

You cab add your configs ( arch/configs) and port it to your custom configuration.

    On Monday, July 19, 2021, 7:38:28 AM PDT, Daniel D <daniel.selvan at jasmin-infotech.com> wrote:  
 
 Hi, 

I would like to compile U-Boot with OpenSSL library and I'm using OpenSSL functions in Freescale's " hab.c ". I do not know how to add the ssl & crypto libraries to U-Boot's makefile (as there are many). I'm quite new to these kind of work, hence I request someone to provide some detailed explanation. 

I've also raised my concern in NXP community and I'm linking that here for your reference. 

Any help would be much appreciated. 

Kind regards, 


Daniel Selvan D. 


Senior Systems Engineer | Jasmin Infotech 

-- 


P Please consider the environment before printing this email. 


  

Information in this email is proprietary and Confidential to Jasmin Infotech Pvt. Ltd. Any use, copying or dissemination of the information in any manner without prior approval, is strictly prohibited. If you are not the intended recipient, please destroy the message and please inform to us..