[PATCH v2 2/5] spi: fsl_qspi: Build driver only if DM_SPI is available
Stefan Roese
sr at denx.de
Tue Jul 13 14:44:30 CEST 2021
On 13.07.21 11:14, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
>
> The driver depends on DM_SPI and if it's not available (e. g. in SPL),
> then we should not try to build it as this will fail.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
Looks good, but you could also add a "depends on DM_SPI" to the Kconfig
entry of this driver.
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> ---
> drivers/spi/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index f70851e4bc..216e72c60f 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
> obj-$(CONFIG_SOFT_SPI) += soft_spi.o
> obj-$(CONFIG_SPI_MEM) += spi-mem.o
> obj-$(CONFIG_TI_QSPI) += ti_qspi.o
> +obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
> else
> obj-y += spi.o
> obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
> @@ -30,7 +31,6 @@ obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o
> obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
> obj-$(CONFIG_FSL_DSPI) += fsl_dspi.o
> obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
> -obj-$(CONFIG_FSL_QSPI) += fsl_qspi.o
> obj-$(CONFIG_SYNQUACER_SPI) += spi-synquacer.o
> obj-$(CONFIG_ICH_SPI) += ich.o
> obj-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list