[PATCH u-boot-mvebu 21/31] arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Marek Behún
marek.behun at nic.cz
Thu Jul 8 19:30:22 CEST 2021
From: Pali Rohár <pali at kernel.org>
Current code uses hack in board_init_f() which calls return_to_bootrom()
to skip U-Boot SPL code and return back to BootROM to load U-Boot via
UART or from NAND.
This change migrates that hack from the board_init_f() function and
changes it to return BOOT_DEVICE_BOOTROM instead of returning to BootROM
directly, so that U-Boot's SPL framework is used for returning to
BootROM.
Signed-off-by: Pali Rohár <pali at kernel.org>
Reviewed-by: Marek Behún <marek.behun at nic.cz>
---
arch/arm/mach-mvebu/spl.c | 48 ++++++++++++++++++++-------------------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 836eb18889..3551c9de42 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -76,7 +76,31 @@ static u32 get_boot_device(void)
u32 spl_boot_device(void)
{
- return get_boot_device();
+ u32 boot_device = get_boot_device();
+
+ /*
+ * Return to the BootROM to continue the Marvell xmodem
+ * UART boot protocol. As initiated by the kwboot tool.
+ *
+ * This can only be done by the BootROM and not by the
+ * U-Boot SPL infrastructure, since the beginning of the
+ * image is already read and interpreted by the BootROM.
+ * SPL has no chance to receive this information. So we
+ * need to return to the BootROM to enable this xmodem
+ * UART download.
+ *
+ * If booting from NAND lets let the BootROM load the
+ * rest of the bootloader.
+ */
+ switch (boot_device) {
+ case BOOT_DEVICE_UART:
+#if defined(CONFIG_ARMADA_38X)
+ case BOOT_DEVICE_NAND:
+#endif
+ return BOOT_DEVICE_BOOTROM;
+ default:
+ return boot_device;
+ }
}
int board_return_to_bootrom(struct spl_image_info *spl_image,
@@ -147,26 +171,4 @@ void board_init_f(ulong dummy)
/* Update read timing control for PCIe */
mv_rtc_config();
-
- /*
- * Return to the BootROM to continue the Marvell xmodem
- * UART boot protocol. As initiated by the kwboot tool.
- *
- * This can only be done by the BootROM and not by the
- * U-Boot SPL infrastructure, since the beginning of the
- * image is already read and interpreted by the BootROM.
- * SPL has no chance to receive this information. So we
- * need to return to the BootROM to enable this xmodem
- * UART download.
- *
- * If booting from NAND lets let the BootROM load the
- * rest of the bootloader.
- */
- switch (get_boot_device()) {
- case BOOT_DEVICE_UART:
-#if defined(CONFIG_ARMADA_38X)
- case BOOT_DEVICE_NAND:
-#endif
- return_to_bootrom();
- }
}
--
2.31.1
More information about the U-Boot
mailing list