[Uboot-stm32] [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support

[Ahmad Fatoum]

Hello Patrick,

On 15.07.21 17:22, Patrick Delaunay wrote:
> With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE
> is not activated), the DT nodes needed by OP-TEE are added by OP-TEE
> firmware in U-Boot device tree, present in FIP.

What about the SCMI nodes. Who will fix up those?

> These nodes are only required in trusted boot, when TF-A load the file
> u-boot.stm32, including the U-Boot device tree with STM32IMAGE header,
> in this case OP-TEE can't update the U-Boot device tree.

[snip]

Cheers,
Ahmad


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |