[PATCH v3 0/5] Add SIMATIC IOT2050 board support
Lokesh Vutla
lokeshvutla at ti.com
Wed Jul 14 11:29:31 CEST 2021
Hi Jan,
On 12/06/21 1:12 am, Jan Kiszka wrote:
> This is the baseline support for the SIMATIC IOT2050 devices.
>
> Changes in v3:
> - rebased
> - addressed several checkpatch warnings
> - a few #ifdef -> IS_ENABLED conversions
> - comment marker for SPDK identifier in .S file
> - trailing whitespaces
> - factored out rti_wdt_load_fw (less #ifdef)
I see that there is no conclusion yet for the Watchdog firmware support. But
that can be split out from this series IMO. Can you repost with basic support so
that I can merge the series. Watchdog support can be dealt separately.
Thanks and regards,
Lokesh
>
> Changes in v2:
> - rebased
> - sync with upstream-accepted DT
> - add boot switch
> - include watchdog support
>
> Allows to boot mainline 5.10 kernels, but not the original BSP-derived
> kernel we currently ship as reference. This is due to the TI sysfw ABI
> breakages between 2.x and 3.x. We will soon provide a transitional
> kernel that allows booting both firmware ABIs - as long as full upstream
> kernel support is work in progress.
>
> Note that this baseline support lacks Ethernet drivers. We are working
> closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
> will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
> is used in the currently shipped IOT2050 devices.
>
> A staging tree for complete IOT2050 support can be found at [1]. Full
> image integration is available via [2].
>
> Jan
>
> [1] https://github.com/siemens/u-boot/commits/jan/iot2050
> [2] https://github.com/siemens/meta-iot2050
>
> Jan Kiszka (5):
> arm: dts: Add IOT2050 device tree files
> board: siemens: Add support for SIMATIC IOT2050 devices
> arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
> watchdog: rti_wdt: Add support for loading firmware
> configs: iot2050: Enable watchdog support, but do not auto-start it
>
> arch/arm/dts/Makefile | 7 +-
> arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 105 +++
> .../dts/k3-am65-iot2050-common-u-boot.dtsi | 103 +++
> arch/arm/dts/k3-am65-iot2050-common.dtsi | 655 ++++++++++++++++++
> arch/arm/dts/k3-am65-iot2050-spl.dts | 16 +
> arch/arm/dts/k3-am65-mcu.dtsi | 9 +
> arch/arm/dts/k3-am6528-iot2050-basic.dts | 67 ++
> arch/arm/dts/k3-am6548-iot2050-advanced.dts | 66 ++
> arch/arm/mach-k3/Kconfig | 1 +
> board/siemens/iot2050/Kconfig | 32 +
> board/siemens/iot2050/MAINTAINERS | 8 +
> board/siemens/iot2050/Makefile | 10 +
> board/siemens/iot2050/README | 65 ++
> board/siemens/iot2050/board.c | 278 ++++++++
> board/siemens/iot2050/config.mk | 8 +
> configs/iot2050_defconfig | 146 ++++
> drivers/watchdog/Kconfig | 20 +
> drivers/watchdog/Makefile | 5 +
> drivers/watchdog/rti_wdt.c | 72 ++
> drivers/watchdog/rti_wdt_fw.S | 20 +
> include/configs/iot2050.h | 60 ++
> 21 files changed, 1752 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
> create mode 100644 arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi
> create mode 100644 arch/arm/dts/k3-am65-iot2050-common.dtsi
> create mode 100644 arch/arm/dts/k3-am65-iot2050-spl.dts
> create mode 100644 arch/arm/dts/k3-am6528-iot2050-basic.dts
> create mode 100644 arch/arm/dts/k3-am6548-iot2050-advanced.dts
> create mode 100644 board/siemens/iot2050/Kconfig
> create mode 100644 board/siemens/iot2050/MAINTAINERS
> create mode 100644 board/siemens/iot2050/Makefile
> create mode 100644 board/siemens/iot2050/README
> create mode 100644 board/siemens/iot2050/board.c
> create mode 100644 board/siemens/iot2050/config.mk
> create mode 100644 configs/iot2050_defconfig
> create mode 100644 drivers/watchdog/rti_wdt_fw.S
> create mode 100644 include/configs/iot2050.h
>
More information about the U-Boot
mailing list