[PATCH 10/33] pci: freescale: Drop old code

Simon Glass sjg at chromium.org
Mon Jul 26 15:34:16 CEST 2021


Drop this old pre-driver model code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 board/freescale/common/cds_pci_ft.c         |  59 ----------
 board/freescale/common/p_corenet/Makefile   |   1 -
 board/freescale/common/p_corenet/pci.c      |  25 -----
 board/freescale/mpc8548cds/mpc8548cds.c     | 114 --------------------
 board/freescale/p1010rdb/p1010rdb.c         |  11 --
 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c |  11 --
 board/freescale/t102xrdb/Makefile           |   1 -
 board/freescale/t102xrdb/pci.c              |  25 -----
 board/freescale/t104xrdb/Makefile           |   1 -
 board/freescale/t104xrdb/pci.c              |  25 -----
 board/freescale/t208xqds/Makefile           |   1 -
 board/freescale/t208xqds/pci.c              |  25 -----
 board/freescale/t208xrdb/Makefile           |   1 -
 board/freescale/t208xrdb/pci.c              |  25 -----
 board/freescale/t4rdb/Makefile              |   1 -
 board/freescale/t4rdb/pci.c                 |  25 -----
 16 files changed, 351 deletions(-)
 delete mode 100644 board/freescale/common/p_corenet/pci.c
 delete mode 100644 board/freescale/t102xrdb/pci.c
 delete mode 100644 board/freescale/t104xrdb/pci.c
 delete mode 100644 board/freescale/t208xqds/pci.c
 delete mode 100644 board/freescale/t208xrdb/pci.c
 delete mode 100644 board/freescale/t4rdb/pci.c

diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c
index be97a28ed25..dc2d62850d1 100644
--- a/board/freescale/common/cds_pci_ft.c
+++ b/board/freescale/common/cds_pci_ft.c
@@ -9,68 +9,9 @@
 #include "cadmus.h"
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-static void cds_pci_fixup(void *blob)
-{
-	int node;
-	const char *path;
-	int len, slot, i;
-	u32 *map = NULL, *piccells = NULL;
-	int off, cells;
-
-	node = fdt_path_offset(blob, "/aliases");
-	if (node >= 0) {
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			node = fdt_path_offset(blob, path);
-			if (node >= 0) {
-				map = fdt_getprop_w(blob, node, "interrupt-map", &len);
-			}
-			/* Each item in "interrupt-map" property is translated with
-			 * following cells:
-			 * PCI #address-cells, PCI #interrupt-cells,
-			 * PIC address, PIC #address-cells, PIC #interrupt-cells.
-			 */
-			cells = fdt_getprop_u32_default(blob, path, "#address-cells", 1);
-			cells += fdt_getprop_u32_default(blob, path, "#interrupt-cells", 1);
-			off = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*(map+cells)));
-			if (off <= 0)
-				return;
-			cells += 1;
-			piccells = (u32 *)fdt_getprop(blob, off, "#address-cells", NULL);
-			if (piccells == NULL)
-				return;
-			cells += *piccells;
-			piccells = (u32 *)fdt_getprop(blob, off, "#interrupt-cells", NULL);
-			if (piccells == NULL)
-				return;
-			cells += *piccells;
-		}
-	}
-
-	if (map) {
-		len /= sizeof(u32);
-
-		slot = get_pci_slot();
-
-		for (i=0;i<len;i+=cells) {
-			/* We rotate the interrupt pins so that the mapping
-			 * changes depending on the slot the carrier card is in.
-			 */
-			map[3] = ((map[3] + slot - 2) % 4) + 1;
-			map+=cells;
-		}
-	}
-}
-#endif
-
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
 	ft_cpu_setup(blob, bd);
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-	ft_pci_setup(blob, bd);
-	cds_pci_fixup(blob);
-#endif
 
 	return 0;
 }
diff --git a/board/freescale/common/p_corenet/Makefile b/board/freescale/common/p_corenet/Makefile
index 29c9d544ae5..ce156018a06 100644
--- a/board/freescale/common/p_corenet/Makefile
+++ b/board/freescale/common/p_corenet/Makefile
@@ -4,5 +4,4 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
 obj-y			+= law.o
-obj-$(CONFIG_PCI)	+= pci.o
 obj-y			+= tlb.o
diff --git a/board/freescale/common/p_corenet/pci.c b/board/freescale/common/p_corenet/pci.c
deleted file mode 100644
index 636334863e1..00000000000
--- a/board/freescale/common/p_corenet/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index a1a9742bfa4..cfb5b0b38bb 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -168,113 +168,6 @@ void lbc_sdram_init(void)
 #endif	/* enable SDRAM init */
 }
 
-#if (defined(CONFIG_PCI) || defined(CONFIG_PCI1)) && !defined(CONFIG_DM_PCI)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-static struct pci_controller pci1_hose;
-#endif	/* CONFIG_PCI */
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	struct fsl_pci_info pci_info;
-	u32 devdisr, pordevsr, io_sel;
-	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
-	int first_free_busno = 0;
-	char buf[32];
-
-	devdisr = in_be32(&gur->devdisr);
-	pordevsr = in_be32(&gur->pordevsr);
-	porpllsr = in_be32(&gur->porpllsr);
-	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
-	debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-
-#ifdef CONFIG_PCI1
-	pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-	pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
-	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
-	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
-
-	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-		SET_STD_PCI_INFO(pci_info, 1);
-		set_next_law(pci_info.mem_phys,
-			law_size_bits(pci_info.mem_size), pci_info.law);
-		set_next_law(pci_info.io_phys,
-			law_size_bits(pci_info.io_size), pci_info.law);
-
-		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
-		printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
-			(pci_32) ? 32 : 64,
-			strmhz(buf, pci_speed),
-			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
-			pci_arb ? "arbiter" : "external-arbiter",
-			pci_info.regs);
-
-		pci1_hose.config_table = pci_mpc85xxcds_config_table;
-		first_free_busno = fsl_pci_init_port(&pci_info,
-					&pci1_hose, first_free_busno);
-
-#ifdef CONFIG_PCIX_CHECK
-		if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
-			/* PCI-X init */
-			if (CONFIG_SYS_CLK_FREQ < 66000000)
-				printf("PCI-X will only work at 66 MHz\n");
-
-			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
-				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
-			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
-		}
-#endif
-	} else {
-		printf("PCI1: disabled\n");
-	}
-
-	puts("\n");
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
-#endif
-
-#ifdef CONFIG_PCI2
-{
-	uint pci2_clk_sel = porpllsr & 0x4000;	/* PORPLLSR[17] */
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	if (pci_dual) {
-		printf("PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf("PCI2: disabled\n");
-	}
-}
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
-#endif /* CONFIG_PCI2 */
-
-	fsl_pcie_init_board(first_free_busno);
-}
-#endif
-
 void configure_rgmii(void)
 {
 	unsigned short temp;
@@ -354,10 +247,3 @@ int board_eth_init(struct bd_info *bis)
 
 	return pci_eth_init(bis);
 }
-
-#if defined(CONFIG_OF_BOARD_SETUP) && !defined(CONFIG_DM_PCI)
-void ft_pci_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 90436337df1..84fc891b67c 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -129,13 +129,6 @@ int board_early_init_r(void)
 	return 0;
 }
 
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* ifdef CONFIG_PCI */
-
 int config_board_mux(int ctrl_type)
 {
 	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -617,10 +610,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	base = env_get_bootm_low();
 	size = env_get_bootm_size();
 
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-	FT_FSL_PCI_SETUP;
-#endif
-
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
 #if defined(CONFIG_HAS_FSL_DR_USB)
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 8273384f2d5..fb9bf795e30 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -239,13 +239,6 @@ int checkboard(void)
 	return 0;
 }
 
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif
-
 int board_early_init_r(void)
 {
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
@@ -363,10 +356,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 
 	fdt_fixup_memory(blob, (u64)base, (u64)size);
 
-#if !defined(CONFIG_DM_PCI)
-	FT_FSL_PCI_SETUP;
-#endif
-
 #ifdef CONFIG_QE
 	do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
 			sizeof("okay"), 0);
diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile
index ddeb44f36e2..e597486c940 100644
--- a/board/freescale/t102xrdb/Makefile
+++ b/board/freescale/t102xrdb/Makefile
@@ -10,7 +10,6 @@ else
 obj-y   += t102xrdb.o
 obj-$(CONFIG_TARGET_T1024RDB)   += cpld.o
 obj-y   += eth_t102xrdb.o
-obj-$(CONFIG_PCI)       += pci.o
 endif
 obj-y   += ddr.o
 obj-y   += law.o
diff --git a/board/freescale/t102xrdb/pci.c b/board/freescale/t102xrdb/pci.c
deleted file mode 100644
index 45ab9223ae1..00000000000
--- a/board/freescale/t102xrdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007-2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile
index 31abbd9aca0..d67e9412ecd 100644
--- a/board/freescale/t104xrdb/Makefile
+++ b/board/freescale/t104xrdb/Makefile
@@ -8,7 +8,6 @@ else
 obj-y	+= t104xrdb.o
 obj-y	+= cpld.o
 obj-y	+= eth.o
-obj-$(CONFIG_PCI)	+= pci.o
 obj-$(CONFIG_FSL_DIU_FB)+= diu.o
 endif
 obj-y	+= ddr.o
diff --git a/board/freescale/t104xrdb/pci.c b/board/freescale/t104xrdb/pci.c
deleted file mode 100644
index 1fd24027000..00000000000
--- a/board/freescale/t104xrdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
index 55b1e7390a0..de8613058de 100644
--- a/board/freescale/t208xqds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
 obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o
-obj-$(CONFIG_PCI)      += pci.o
 endif
 
 obj-y   += ddr.o
diff --git a/board/freescale/t208xqds/pci.c b/board/freescale/t208xqds/pci.c
deleted file mode 100644
index a03b11ccb50..00000000000
--- a/board/freescale/t208xqds/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007-2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t208xrdb/Makefile b/board/freescale/t208xrdb/Makefile
index 25ea66a0248..7af3cd0ac4c 100644
--- a/board/freescale/t208xrdb/Makefile
+++ b/board/freescale/t208xrdb/Makefile
@@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD
 obj-y	+= spl.o
 else
 obj-$(CONFIG_TARGET_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o
-obj-$(CONFIG_PCI)      += pci.o
 endif
 
 obj-y   += ddr.o
diff --git a/board/freescale/t208xrdb/pci.c b/board/freescale/t208xrdb/pci.c
deleted file mode 100644
index 45ab9223ae1..00000000000
--- a/board/freescale/t208xrdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007-2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile
index f1fd623339c..3106848639c 100644
--- a/board/freescale/t4rdb/Makefile
+++ b/board/freescale/t4rdb/Makefile
@@ -10,7 +10,6 @@ else
 obj-$(CONFIG_TARGET_T4240RDB)	+= t4240rdb.o
 obj-y			+= cpld.o
 obj-y			+= eth.o
-obj-$(CONFIG_PCI)	+= pci.o
 endif
 
 obj-y	+= ddr.o
diff --git a/board/freescale/t4rdb/pci.c b/board/freescale/t4rdb/pci.c
deleted file mode 100644
index c2bc05164dd..00000000000
--- a/board/freescale/t4rdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
-- 
2.32.0.432.gabb21c7263-goog



More information about the U-Boot mailing list