[PATCH v3 0/9] phyCORE-i.MX8MP Update

[Teresa Remmet]

Hello,

this is the third version of the phyCORE-i.MX8MP updates. This
includes also an update of imx8mp.dtsi from kernel and the introduction of a
common imx8mp-u-boot.dtsi.

This version only moves some code from one place/patch to an other.
No intentional functional change to the previous version.
Changes are listed in patches more detailed.

Changes in v3:
	- added Reviewed-by tags.
	- [2/9] moved binman nodes to common imx8mp-u-boot.dtsi
	- made now all debug uart changes in patch: 
          [4/9] "board: phytec: phycore_imx8mp: Change debug UART"

Changes in v2:
	- [5/9] removed hardcoded serverip in environment
	- [5/9] removed not needed fec eth defines in board config include

Teresa

Teresa Remmet (9):
  arm: dts: imx8mp: Resync imx8mp device tree include
  arm: dts: imx8mp: Add common u-boot dtsi
  arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
  board: phytec: phycore_imx8mp: Change debug UART
  board: phytec: phycore_imx8mp: Add fec support
  board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
  board: phytec: phycore-imx8mp: Enable DVS1 control
  arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
  board: phytec: imx8mp-phycore: Switch to binman

 arch/arm/dts/imx8mp-evk-u-boot.dtsi           | 143 +----------------
 .../imx8mp-phyboard-pollux-rdk-u-boot.dtsi    |  47 +-----
 arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts   |  58 ++++++-
 arch/arm/dts/imx8mp-phycore-som.dtsi          |   2 +-
 arch/arm/dts/imx8mp-u-boot.dtsi               | 149 ++++++++++++++++++
 arch/arm/dts/imx8mp.dtsi                      | 146 ++++++++++++++++-
 arch/arm/mach-imx/imx8m/Kconfig               |   1 +
 .../phytec/phycore_imx8mp/imximage-8mp-sd.cfg |  10 ++
 board/phytec/phycore_imx8mp/phycore-imx8mp.c  |  14 ++
 board/phytec/phycore_imx8mp/spl.c             |  23 ++-
 configs/phycore-imx8mp_defconfig              |  12 +-
 include/configs/phycore_imx8mp.h              |  21 ++-
 12 files changed, 424 insertions(+), 202 deletions(-)
 create mode 100644 arch/arm/dts/imx8mp-u-boot.dtsi
 create mode 100644 board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg

-- 
2.25.1