[PATCH] configs: j721e_evm: Switch envboot out for distro_bootcmd

Tom Rini trini at konsulko.com
Thu Jul 1 16:27:43 CEST 2021


Swap out the TI-centric "envboot" logic for the generic distro_bootcmd
logic for the bootcmd we run before trying to do something more complex
involving additional firmware, etc.

Cc: Lokesh Vutla <lokeshvutla at ti.com> (maintainer:J721E BOARD)
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 configs/j721e_evm_a72_defconfig |  2 +-
 include/configs/j721e_evm.h     | 24 ++++++++++++++++++++++--
 2 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 365d66269003..2e890cdfe60a 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -29,7 +29,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
 CONFIG_LOGLEVEL=7
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h
index b707fc4e899f..62da8ff956f7 100644
--- a/include/configs/j721e_evm.h
+++ b/include/configs/j721e_evm.h
@@ -10,7 +10,6 @@
 #define __CONFIG_J721E_EVM_H
 
 #include <linux/sizes.h>
-#include <config_distro_bootcmd.h>
 #include <environment/ti/mmc.h>
 #include <environment/ti/k3_rproc.h>
 #include <environment/ti/ufs.h>
@@ -160,6 +159,26 @@
 #define EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
 #endif
 
+#if CONFIG_IS_ENABLED(CMD_PXE)
+# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
+#else
+# define BOOT_TARGET_PXE(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP)
+# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
+#else
+# define BOOT_TARGET_DHCP(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	BOOT_TARGET_PXE(func) \
+	BOOT_TARGET_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+
 /* Incorporate settings into the U-Boot environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	DEFAULT_LINUX_BOOT_ENV						\
@@ -170,7 +189,8 @@
 	EXTRA_ENV_RPROC_SETTINGS					\
 	EXTRA_ENV_DFUARGS						\
 	DEFAULT_UFS_TI_ARGS						\
-	EXTRA_ENV_J721E_BOARD_SETTINGS_MTD
+	EXTRA_ENV_J721E_BOARD_SETTINGS_MTD				\
+	BOOTENV
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
-- 
2.17.1



More information about the U-Boot mailing list