[PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
masahisa.kojima at linaro.org
Tue Jul 13 10:31:18 CEST 2021
Hi Heinrich,
> > > TCG spec also requires to measure "Calling EFI Application from
> > > Boot Option" for each boot attempt, and "Returning from EFI
> > > Application from Boot Option" if a boot device returns control
> > > back to the Boot Manager.
I would like to hear your opinion regarding
"Calling EFI Application from Boot Option" measurement.
My current(v1 patch series) implementation considers
both "bootefi bootmgr" and "bootefi $image_addr" cases,
so I do this "Calling EFI Application from Boot Option" measurement
at efi_boottime.c::efi_start_image().
Do I need to implement only the case UEFI application boot from bootmgr?
If yes, I will move the timing of this measurement at
efi_bootmgr.c::efi_bootmgr_load().
As a reference, in edk2, this measurement is performed in
ready_to_boot event handler, ready_to_boot handler is called
upon the user selects the boot option in boot manager.
What do you think?
Thanks,
Masahisa Kojima
On Fri, 9 Jul 2021 at 11:44, Masahisa Kojima <masahisa.kojima at linaro.org> wrote:
>
> On Fri, 9 Jul 2021 at 02:46, Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> >
> > On 7/7/21 3:36 PM, Masahisa Kojima wrote:
> > > TCG PC Client PFP spec requires to measure "Boot####"
> > > and "BootOrder" variables, EV_SEPARATOR event prior
> > > to the Ready to Boot invocation.
> > > Since u-boot does not implement Ready to Boot event,
> > > these measurements are performed when efi_start_image() is called.
> > >
> > > TCG spec also requires to measure "Calling EFI Application from
> > > Boot Option" for each boot attempt, and "Returning from EFI
> > > Application from Boot Option" if a boot device returns control
> > > back to the Boot Manager.
> > >
> > > Signed-off-by: Masahisa Kojima <masahisa.kojima at linaro.org>
> > > ---
> > > include/efi_loader.h | 4 ++
> > > include/tpm-v2.h | 18 ++++-
> > > lib/efi_loader/efi_boottime.c | 20 ++++++
> > > lib/efi_loader/efi_tcg2.c | 123 ++++++++++++++++++++++++++++++++++
> > > 4 files changed, 164 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/include/efi_loader.h b/include/efi_loader.h
> > > index 0a9c82a257..281ffff30f 100644
> > > --- a/include/efi_loader.h
> > > +++ b/include/efi_loader.h
> > > @@ -407,6 +407,10 @@ efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size);
> > > efi_status_t efi_init_variables(void);
> > > /* Notify ExitBootServices() is called */
> > > void efi_variables_boot_exit_notify(void);
> > > +/* Measure efi application invocation */
> > > +efi_status_t EFIAPI efi_tcg2_measure_efi_app_invocation(void);
> > > +/* Measure efi application exit */
> > > +efi_status_t EFIAPI efi_tcg2_measure_efi_app_exit(void);
> > > /* Called by bootefi to initialize root node */
> > > efi_status_t efi_root_node_register(void);
> > > /* Called by bootefi to initialize runtime */
> > > diff --git a/include/tpm-v2.h b/include/tpm-v2.h
> > > index 3e48e35861..8a7b7f1874 100644
> > > --- a/include/tpm-v2.h
> > > +++ b/include/tpm-v2.h
> > > @@ -73,7 +73,7 @@ struct udevice;
> > > /*
> > > * event types, cf.
> > > * "TCG PC Client Platform Firmware Profile Specification", Family "2.0"
> > > - * rev 1.04, June 3, 2019
> > > + * Level 00 Version 1.05 Revision 23, May 7, 2021
> > > */
> > > #define EV_EFI_EVENT_BASE ((u32)0x80000000)
> > > #define EV_EFI_VARIABLE_DRIVER_CONFIG ((u32)0x80000001)
> > > @@ -85,8 +85,24 @@ struct udevice;
> > > #define EV_EFI_ACTION ((u32)0x80000007)
> > > #define EV_EFI_PLATFORM_FIRMWARE_BLOB ((u32)0x80000008)
> > > #define EV_EFI_HANDOFF_TABLES ((u32)0x80000009)
> > > +#define EV_EFI_PLATFORM_FIRMWARE_BLOB2 ((u32)0x8000000A)
> > > +#define EV_EFI_HANDOFF_TABLES2 ((u32)0x8000000B)
> > > +#define EV_EFI_VARIABLE_BOOT2 ((u32)0x8000000C)
> > > #define EV_EFI_HCRTM_EVENT ((u32)0x80000010)
> > > #define EV_EFI_VARIABLE_AUTHORITY ((u32)0x800000E0)
> > > +#define EV_EFI_SPDM_FIRMWARE_BLOB ((u32)0x800000E1)
> > > +#define EV_EFI_SPDM_FIRMWARE_CONFIG ((u32)0x800000E2)
> > > +
> > > +#define EFI_CALLING_EFI_APPLICATION \
> > > + "Calling EFI Application from Boot Option"
> > > +#define EFI_RETURNING_FROM_EFI_APPLICATION \
> > > + "Returning from EFI Application from Boot Option"
> > > +#define EFI_EXIT_BOOT_SERVICES_INVOCATION \
> > > + "Exit Boot Services Invocation"
> > > +#define EFI_EXIT_BOOT_SERVICES_FAILED \
> > > + "Exit Boot Services Returned with Failure"
> > > +#define EFI_EXIT_BOOT_SERVICES_SUCCEEDED \
> > > + "Exit Boot Services Returned with Success"
> >
> > Which spec defines if the string in the event log shall be utf-8 or utf-16?
>
> TCG PC Client PFP spec does not clearly define the character encoding.
> In my understanding, the string derived from UEFI spec such as
> UEFI variable name uses utf-16(CHAR16).
> Other strings like "Calling EFI Application from Boot Option" defind in TCG PC
> Client spec use 1 byte ASCII encoding.
>
> EDK2 implementation also uses 1 byte ASCII encoding for these strings,
> and tpm2-tools::tpm2_eventlog command can handles properly.
>
> Thanks,
> Masahisa Kojima
>
> >
> > Best regards
> >
> > Heinrich
> >
> > >
> > > /* TPMS_TAGGED_PROPERTY Structure */
> > > struct tpms_tagged_property {
> > > diff --git a/lib/efi_loader/efi_boottime.c b/lib/efi_loader/efi_boottime.c
> > > index f6d5ba05e3..2914800c56 100644
> > > --- a/lib/efi_loader/efi_boottime.c
> > > +++ b/lib/efi_loader/efi_boottime.c
> > > @@ -2993,6 +2993,16 @@ efi_status_t EFIAPI efi_start_image(efi_handle_t image_handle,
> > > image_obj->exit_status = &exit_status;
> > > image_obj->exit_jmp = &exit_jmp;
> > >
> > > + if (IS_ENABLED(CONFIG_EFI_TCG2_PROTOCOL)) {
> > > + if (image_obj->image_type == IMAGE_SUBSYSTEM_EFI_APPLICATION) {
> > > + ret = efi_tcg2_measure_efi_app_invocation();
> > > + if (ret != EFI_SUCCESS) {
> > > + EFI_PRINT("tcg2 measurement fails(0x%lx)\n",
> > > + ret);
> > > + }
> > > + }
> > > + }
> > > +
> > > /* call the image! */
> > > if (setjmp(&exit_jmp)) {
> > > /*
> > > @@ -3251,6 +3261,16 @@ static efi_status_t EFIAPI efi_exit(efi_handle_t image_handle,
> > > exit_status != EFI_SUCCESS)
> > > efi_delete_image(image_obj, loaded_image_protocol);
> > >
> > > + if (IS_ENABLED(CONFIG_EFI_TCG2_PROTOCOL)) {
> > > + if (image_obj->image_type == IMAGE_SUBSYSTEM_EFI_APPLICATION) {
> > > + ret = efi_tcg2_measure_efi_app_exit();
> > > + if (ret != EFI_SUCCESS) {
> > > + EFI_PRINT("tcg2 measurement fails(0x%lx)\n",
> > > + ret);
> > > + }
> > > + }
> > > + }
> > > +
> > > /* Make sure entry/exit counts for EFI world cross-overs match */
> > > EFI_EXIT(exit_status);
> > >
> > > diff --git a/lib/efi_loader/efi_tcg2.c b/lib/efi_loader/efi_tcg2.c
> > > index 2a248bd62a..6e903e3cb3 100644
> > > --- a/lib/efi_loader/efi_tcg2.c
> > > +++ b/lib/efi_loader/efi_tcg2.c
> > > @@ -35,6 +35,7 @@ struct event_log_buffer {
> > > };
> > >
> > > static struct event_log_buffer event_log;
> > > +static bool tcg2_efi_app_invoked;
> > > /*
> > > * When requesting TPM2_CAP_TPM_PROPERTIES the value is on a standard offset.
> > > * Since the current tpm2_get_capability() response buffers starts at
> > > @@ -1383,6 +1384,128 @@ static efi_status_t tcg2_measure_variable(struct udevice *dev, u32 pcr_index,
> > > return ret;
> > > }
> > >
> > > +/**
> > > + * tcg2_measure_boot_variable() - measure boot variables
> > > + *
> > > + * @dev: TPM device
> > > + *
> > > + * Return: status code
> > > + */
> > > +static efi_status_t tcg2_measure_boot_variable(struct udevice *dev)
> > > +{
> > > + u16 *boot_order;
> > > + u16 var_name[] = L"BootOrder";
> > > + u16 boot_name[] = L"Boot0000";
> > > + u16 hexmap[] = L"0123456789ABCDEF";
> > > + u8 *bootvar;
> > > + efi_uintn_t var_data_size;
> > > + u32 count, i;
> > > + efi_status_t ret;
> > > +
> > > + boot_order = efi_get_var(var_name, &efi_global_variable_guid,
> > > + &var_data_size);
> > > + if (!boot_order) {
> > > + log_info("BootOrder not defined\n");
> > > + ret = EFI_NOT_FOUND;
> > > + goto error;
> > > + }
> > > +
> > > + ret = tcg2_measure_variable(dev, 1, EV_EFI_VARIABLE_BOOT2, var_name,
> > > + &efi_global_variable_guid, var_data_size,
> > > + (u8 *)boot_order);
> > > + if (ret != EFI_SUCCESS)
> > > + goto error;
> > > +
> > > + count = var_data_size / sizeof(*boot_order);
> > > + for (i = 0; i < count; i++) {
> > > + boot_name[4] = hexmap[(boot_order[i] & 0xf000) >> 12];
> > > + boot_name[5] = hexmap[(boot_order[i] & 0x0f00) >> 8];
> > > + boot_name[6] = hexmap[(boot_order[i] & 0x00f0) >> 4];
> > > + boot_name[7] = hexmap[(boot_order[i] & 0x000f)];
> > > +
> > > + bootvar = efi_get_var(boot_name, &efi_global_variable_guid,
> > > + &var_data_size);
> > > +
> > > + if (!bootvar) {
> > > + log_info("%ls not found\n", boot_name);
> > > + continue;
> > > + }
> > > +
> > > + ret = tcg2_measure_variable(dev, 1, EV_EFI_VARIABLE_BOOT2,
> > > + boot_name,
> > > + &efi_global_variable_guid,
> > > + var_data_size, bootvar);
> > > + free(bootvar);
> > > + if (ret != EFI_SUCCESS)
> > > + goto error;
> > > + }
> > > +
> > > +error:
> > > + free(boot_order);
> > > + return ret;
> > > +}
> > > +
> > > +/**
> > > + * efi_tcg2_measure_efi_app_invocation() - measure efi app invocation
> > > + *
> > > + * Return: status code
> > > + */
> > > +efi_status_t EFIAPI efi_tcg2_measure_efi_app_invocation(void)
> > > +{
> > > + efi_status_t ret;
> > > + u32 pcr_index;
> > > + struct udevice *dev;
> > > + u32 event = 0;
> > > +
> > > + if (tcg2_efi_app_invoked)
> > > + return EFI_SUCCESS;
> > > +
> > > + ret = platform_get_tpm2_device(&dev);
> > > + if (ret != EFI_SUCCESS)
> > > + return ret;
> > > +
> > > + ret = tcg2_measure_boot_variable(dev);
> > > + if (ret != EFI_SUCCESS)
> > > + goto out;
> > > +
> > > + ret = tcg2_measure_event(dev, 4, EV_EFI_ACTION,
> > > + strlen(EFI_CALLING_EFI_APPLICATION),
> > > + (u8 *)EFI_CALLING_EFI_APPLICATION);
> > > + if (ret != EFI_SUCCESS)
> > > + goto out;
> > > +
> > > + for (pcr_index = 0; pcr_index <= 7; pcr_index++) {
> > > + ret = tcg2_measure_event(dev, pcr_index, EV_SEPARATOR,
> > > + sizeof(event), (u8 *)&event);
> > > + if (ret != EFI_SUCCESS)
> > > + goto out;
> > > + }
> > > +
> > > + tcg2_efi_app_invoked = true;
> > > +out:
> > > + return ret;
> > > +}
> > > +
> > > +/**
> > > + * efi_tcg2_measure_efi_app_exit() - measure efi app exit
> > > + *
> > > + * Return: status code
> > > + */
> > > +efi_status_t EFIAPI efi_tcg2_measure_efi_app_exit(void)
> > > +{
> > > + efi_status_t ret;
> > > + struct udevice *dev;
> > > +
> > > + ret = platform_get_tpm2_device(&dev);
> > > + if (ret != EFI_SUCCESS)
> > > + return ret;
> > > +
> > > + ret = tcg2_measure_event(dev, 4, EV_EFI_ACTION,
> > > + strlen(EFI_RETURNING_FROM_EFI_APPLICATION),
> > > + (u8 *)EFI_RETURNING_FROM_EFI_APPLICATION);
> > > + return ret;
> > > +}
> > > +
> > > /**
> > > * tcg2_measure_secure_boot_variable() - measure secure boot variables
> > > *
> > >
> >
More information about the U-Boot
mailing list